Find the method families referenced across every product guide, compare international and Indian companion protocols, then open the official issuing-body catalogue to verify the current edition.
Each page aligns every published product test with the directly cited method and relevant IS/BIS, ISO, DIN/EN, ASTM, IEC or industry companion protocols.
“Relevant” means technically connected to a test or product family in this Wiki. It does not mean that every listed protocol is contractually acceptable for every grade.
| Standard / protocol | Body | Test or subject | Role | Scope and significance | Official verification |
|---|---|---|---|---|---|
| ASTM D445 | ASTM | Kinematic viscosity and viscosity classification | Test method | Measures resistance to flow at a stated temperature for grade confirmation, dilution, shear and oxidation assessment. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D445 |
| ISO 3104 | ISO | Kinematic viscosity and viscosity classification | Test method | Measures resistance to flow at a stated temperature for grade confirmation, dilution, shear and oxidation assessment. | https://www.iso.org/search.html?q=ISO%203104 |
| IS 1448 Part 25 Section 1 | IS/BIS | Kinematic viscosity and viscosity classification | Test method | Measures resistance to flow at a stated temperature for grade confirmation, dilution, shear and oxidation assessment. | https://standardsbis.bsbedge.com/BIS_SearchStandard.aspx?Standard_Number=IS%201448%20Part%2025%20Section%201&id=0 |
| IS 1448 Part 186 | IS/BIS | Kinematic viscosity and viscosity classification | Test method | Measures resistance to flow at a stated temperature for grade confirmation, dilution, shear and oxidation assessment. | https://standardsbis.bsbedge.com/BIS_SearchStandard.aspx?Standard_Number=IS%201448%20Part%20186&id=0 |
| DIN EN ISO 3104 | DIN | Kinematic viscosity and viscosity classification | Test method | Measures resistance to flow at a stated temperature for grade confirmation, dilution, shear and oxidation assessment. | https://www.dinmedia.de/en/search-results/81186!search?query=DIN%20EN%20ISO%203104 |
| ASTM D2983 | ASTM | Kinematic viscosity and viscosity classification | Test method | Measures resistance to flow at a stated temperature for grade confirmation, dilution, shear and oxidation assessment. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D2983 |
| ASTM D5293 | ASTM | Kinematic viscosity and viscosity classification | Test method | Measures resistance to flow at a stated temperature for grade confirmation, dilution, shear and oxidation assessment. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D5293 |
| ASTM D664 | ASTM | Acid number and neutralisation number | Test method | Determines acidic or basic constituents by a defined titration system; results from different titration methods are not automatically interchangeable. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D664 |
| ASTM D974 | ASTM | Acid number and neutralisation number | Test method | Determines acidic or basic constituents by a defined titration system; results from different titration methods are not automatically interchangeable. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D974 |
| IEC 62021 | IEC | Acid number and neutralisation number | Test method | Determines acidic or basic constituents by a defined titration system; results from different titration methods are not automatically interchangeable. | https://webstore.iec.ch/en/search?query=IEC%2062021 |
| IS 1448 Part 2 | IS/BIS | Acid number and neutralisation number | Test method | Determines acidic or basic constituents by a defined titration system; results from different titration methods are not automatically interchangeable. | https://standardsbis.bsbedge.com/BIS_SearchStandard.aspx?Standard_Number=IS%201448%20Part%202&id=0 |
| DIN 51558 | DIN | Acid number and neutralisation number | Test method | Determines acidic or basic constituents by a defined titration system; results from different titration methods are not automatically interchangeable. | https://www.dinmedia.de/en/search-results/81186!search?query=DIN%2051558 |
| ASTM D2896 | ASTM | Base number / alkalinity reserve | Test method | Determines alkaline reserve in engine and cylinder lubricants using a selected titration chemistry that must remain consistent for trending. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D2896 |
| ASTM D4739 | ASTM | Base number / alkalinity reserve | Test method | Determines alkaline reserve in engine and cylinder lubricants using a selected titration chemistry that must remain consistent for trending. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D4739 |
| DIN ISO 3771 | DIN | Base number / alkalinity reserve | Test method | Determines alkaline reserve in engine and cylinder lubricants using a selected titration chemistry that must remain consistent for trending. | https://www.dinmedia.de/en/search-results/81186!search?query=DIN%20ISO%203771 |
| ASTM D4052 | ASTM | Density and relative density | Test method | Determines density for identity, quantity conversion, blending and compositional assessment using temperature-controlled instrumentation. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D4052 |
| ISO 12185 | ISO | Density and relative density | Test method | Determines density for identity, quantity conversion, blending and compositional assessment using temperature-controlled instrumentation. | https://www.iso.org/search.html?q=ISO%2012185 |
| IS 1448 Part 16 | IS/BIS | Density and relative density | Test method | Determines density for identity, quantity conversion, blending and compositional assessment using temperature-controlled instrumentation. | https://standardsbis.bsbedge.com/BIS_SearchStandard.aspx?Standard_Number=IS%201448%20Part%2016&id=0 |
| IS 1448 Part 32 | IS/BIS | Density and relative density | Test method | Determines density for identity, quantity conversion, blending and compositional assessment using temperature-controlled instrumentation. | https://standardsbis.bsbedge.com/BIS_SearchStandard.aspx?Standard_Number=IS%201448%20Part%2032&id=0 |
| IS 1448 Part 167 | IS/BIS | Density and relative density | Test method | Determines density for identity, quantity conversion, blending and compositional assessment using temperature-controlled instrumentation. | https://standardsbis.bsbedge.com/BIS_SearchStandard.aspx?Standard_Number=IS%201448%20Part%20167&id=0 |
| DIN EN ISO 12185 | DIN | Density and relative density | Test method | Determines density for identity, quantity conversion, blending and compositional assessment using temperature-controlled instrumentation. | https://www.dinmedia.de/en/search-results/81186!search?query=DIN%20EN%20ISO%2012185 |
| DIN 51757 | DIN | Density and relative density | Test method | Determines density for identity, quantity conversion, blending and compositional assessment using temperature-controlled instrumentation. | https://www.dinmedia.de/en/search-results/81186!search?query=DIN%2051757 |
| ASTM D86 | ASTM | Distillation and volatility distribution | Test method | Determines boiling-range distribution of petroleum products for identity, volatility, combustion and contamination assessment. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D86 |
| ISO 3405 | ISO | Distillation and volatility distribution | Test method | Determines boiling-range distribution of petroleum products for identity, volatility, combustion and contamination assessment. | https://www.iso.org/search.html?q=ISO%203405 |
| IS 1448 Part 18 | IS/BIS | Distillation and volatility distribution | Test method | Determines boiling-range distribution of petroleum products for identity, volatility, combustion and contamination assessment. | https://standardsbis.bsbedge.com/BIS_SearchStandard.aspx?Standard_Number=IS%201448%20Part%2018&id=0 |
| DIN EN ISO 3405 | DIN | Distillation and volatility distribution | Test method | Determines boiling-range distribution of petroleum products for identity, volatility, combustion and contamination assessment. | https://www.dinmedia.de/en/search-results/81186!search?query=DIN%20EN%20ISO%203405 |
| ASTM D92 | ASTM | Flash point | Test method | Determines flash point using the apparatus and open- or closed-cup procedure required by the product specification. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D92 |
| ASTM D93 | ASTM | Flash point | Test method | Determines flash point using the apparatus and open- or closed-cup procedure required by the product specification. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D93 |
| ISO 2719 | ISO | Flash point | Test method | Determines flash point using the apparatus and open- or closed-cup procedure required by the product specification. | https://www.iso.org/search.html?q=ISO%202719 |
| IS 1448 Part 20 | IS/BIS | Flash point | Test method | Determines flash point using the apparatus and open- or closed-cup procedure required by the product specification. | https://standardsbis.bsbedge.com/BIS_SearchStandard.aspx?Standard_Number=IS%201448%20Part%2020&id=0 |
| IS 1448 Part 21 | IS/BIS | Flash point | Test method | Determines flash point using the apparatus and open- or closed-cup procedure required by the product specification. | https://standardsbis.bsbedge.com/BIS_SearchStandard.aspx?Standard_Number=IS%201448%20Part%2021&id=0 |
| DIN EN ISO 2719 | DIN | Flash point | Test method | Determines flash point using the apparatus and open- or closed-cup procedure required by the product specification. | https://www.dinmedia.de/en/search-results/81186!search?query=DIN%20EN%20ISO%202719 |
| ASTM D6304 | ASTM | Water by Karl Fischer and product-specific methods | Test method | Quantifies water by coulometric or volumetric Karl Fischer titration, or by the product-specific separation method named in the governing specification. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D6304 |
| ASTM D1533 | ASTM | Water by Karl Fischer and product-specific methods | Test method | Quantifies water by coulometric or volumetric Karl Fischer titration, or by the product-specific separation method named in the governing specification. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D1533 |
| IEC 60814 | IEC | Water by Karl Fischer and product-specific methods | Test method | Quantifies water by coulometric or volumetric Karl Fischer titration, or by the product-specific separation method named in the governing specification. | https://webstore.iec.ch/en/search?query=IEC%2060814 |
| ISO 3733 | ISO | Water by Karl Fischer and product-specific methods | Test method | Quantifies water by coulometric or volumetric Karl Fischer titration, or by the product-specific separation method named in the governing specification. | https://www.iso.org/search.html?q=ISO%203733 |
| ASTM D2709 | ASTM | Water by Karl Fischer and product-specific methods | Test method | Quantifies water by coulometric or volumetric Karl Fischer titration, or by the product-specific separation method named in the governing specification. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D2709 |
| IS 1448 Part 182 | IS/BIS | Water by Karl Fischer and product-specific methods | Test method | Quantifies water by coulometric or volumetric Karl Fischer titration, or by the product-specific separation method named in the governing specification. | https://standardsbis.bsbedge.com/BIS_SearchStandard.aspx?Standard_Number=IS%201448%20Part%20182&id=0 |
| DIN 51777 | DIN | Water by Karl Fischer and product-specific methods | Test method | Quantifies water by coulometric or volumetric Karl Fischer titration, or by the product-specific separation method named in the governing specification. | https://www.dinmedia.de/en/search-results/81186!search?query=DIN%2051777 |
| ASTM D5453 | ASTM | Sulfur content | Test method | Determines sulfur by ultraviolet fluorescence or X-ray fluorescence at the concentration range and matrix covered by the selected method. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D5453 |
| ASTM D4294 | ASTM | Sulfur content | Test method | Determines sulfur by ultraviolet fluorescence or X-ray fluorescence at the concentration range and matrix covered by the selected method. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D4294 |
| ISO 20846 | ISO | Sulfur content | Test method | Determines sulfur by ultraviolet fluorescence or X-ray fluorescence at the concentration range and matrix covered by the selected method. | https://www.iso.org/search.html?q=ISO%2020846 |
| ISO 8754 | ISO | Sulfur content | Test method | Determines sulfur by ultraviolet fluorescence or X-ray fluorescence at the concentration range and matrix covered by the selected method. | https://www.iso.org/search.html?q=ISO%208754 |
| ISO 14596 | ISO | Sulfur content | Test method | Determines sulfur by ultraviolet fluorescence or X-ray fluorescence at the concentration range and matrix covered by the selected method. | https://www.iso.org/search.html?q=ISO%2014596 |
| IS 1448 Part 159 | IS/BIS | Sulfur content | Test method | Determines sulfur by ultraviolet fluorescence or X-ray fluorescence at the concentration range and matrix covered by the selected method. | https://standardsbis.bsbedge.com/BIS_SearchStandard.aspx?Standard_Number=IS%201448%20Part%20159&id=0 |
| IS 1448 Part 160 | IS/BIS | Sulfur content | Test method | Determines sulfur by ultraviolet fluorescence or X-ray fluorescence at the concentration range and matrix covered by the selected method. | https://standardsbis.bsbedge.com/BIS_SearchStandard.aspx?Standard_Number=IS%201448%20Part%20160&id=0 |
| IS 1448 Part 161 | IS/BIS | Sulfur content | Test method | Determines sulfur by ultraviolet fluorescence or X-ray fluorescence at the concentration range and matrix covered by the selected method. | https://standardsbis.bsbedge.com/BIS_SearchStandard.aspx?Standard_Number=IS%201448%20Part%20161&id=0 |
| DIN EN ISO 20846 | DIN | Sulfur content | Test method | Determines sulfur by ultraviolet fluorescence or X-ray fluorescence at the concentration range and matrix covered by the selected method. | https://www.dinmedia.de/en/search-results/81186!search?query=DIN%20EN%20ISO%2020846 |
| ASTM D613 | ASTM | Diesel ignition quality and cetane index | Test method | Determines ignition quality in a reference engine or approved constant-volume instrument, or calculates an index from specified fuel properties. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D613 |
| ISO 5165 | ISO | Diesel ignition quality and cetane index | Test method | Determines ignition quality in a reference engine or approved constant-volume instrument, or calculates an index from specified fuel properties. | https://www.iso.org/search.html?q=ISO%205165 |
| ASTM D6890 | ASTM | Diesel ignition quality and cetane index | Test method | Determines ignition quality in a reference engine or approved constant-volume instrument, or calculates an index from specified fuel properties. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D6890 |
| EN 15195 | EN | Diesel ignition quality and cetane index | Test method | Determines ignition quality in a reference engine or approved constant-volume instrument, or calculates an index from specified fuel properties. | https://standards.cencenelec.eu/ |
| ASTM D4737 | ASTM | Diesel ignition quality and cetane index | Test method | Determines ignition quality in a reference engine or approved constant-volume instrument, or calculates an index from specified fuel properties. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D4737 |
| IS 1448 Part 9 | IS/BIS | Diesel ignition quality and cetane index | Test method | Determines ignition quality in a reference engine or approved constant-volume instrument, or calculates an index from specified fuel properties. | https://standardsbis.bsbedge.com/BIS_SearchStandard.aspx?Standard_Number=IS%201448%20Part%209&id=0 |
| IS 1448 Part 174 | IS/BIS | Diesel ignition quality and cetane index | Test method | Determines ignition quality in a reference engine or approved constant-volume instrument, or calculates an index from specified fuel properties. | https://standardsbis.bsbedge.com/BIS_SearchStandard.aspx?Standard_Number=IS%201448%20Part%20174&id=0 |
| DIN EN ISO 5165 | DIN | Diesel ignition quality and cetane index | Test method | Determines ignition quality in a reference engine or approved constant-volume instrument, or calculates an index from specified fuel properties. | https://www.dinmedia.de/en/search-results/81186!search?query=DIN%20EN%20ISO%205165 |
| ASTM D6079 | ASTM | Diesel fuel lubricity / HFRR | Test method | Determines diesel-fuel lubricity by high-frequency reciprocating rig under controlled temperature, humidity and conditioning. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D6079 |
| ISO 12156-1 | ISO | Diesel fuel lubricity / HFRR | Test method | Determines diesel-fuel lubricity by high-frequency reciprocating rig under controlled temperature, humidity and conditioning. | https://www.iso.org/search.html?q=ISO%2012156-1 |
| IS 1448 Part 149 | IS/BIS | Diesel fuel lubricity / HFRR | Test method | Determines diesel-fuel lubricity by high-frequency reciprocating rig under controlled temperature, humidity and conditioning. | https://standardsbis.bsbedge.com/BIS_SearchStandard.aspx?Standard_Number=IS%201448%20Part%20149&id=0 |
| DIN EN ISO 12156-1 | DIN | Diesel fuel lubricity / HFRR | Test method | Determines diesel-fuel lubricity by high-frequency reciprocating rig under controlled temperature, humidity and conditioning. | https://www.dinmedia.de/en/search-results/81186!search?query=DIN%20EN%20ISO%2012156-1 |
| ASTM D6371 | ASTM | Cold-flow and low-temperature fuel properties | Test method | Characterises filterability, cloud formation, freezing or pour behaviour using the test specified for the fuel and climatic grade. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D6371 |
| EN 116 | EN | Cold-flow and low-temperature fuel properties | Test method | Characterises filterability, cloud formation, freezing or pour behaviour using the test specified for the fuel and climatic grade. | https://standards.cencenelec.eu/ |
| ASTM D2500 | ASTM | Cold-flow and low-temperature fuel properties | Test method | Characterises filterability, cloud formation, freezing or pour behaviour using the test specified for the fuel and climatic grade. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D2500 |
| ASTM D97 | ASTM | Cold-flow and low-temperature fuel properties | Test method | Characterises filterability, cloud formation, freezing or pour behaviour using the test specified for the fuel and climatic grade. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D97 |
| ISO 3016 | ISO | Cold-flow and low-temperature fuel properties | Test method | Characterises filterability, cloud formation, freezing or pour behaviour using the test specified for the fuel and climatic grade. | https://www.iso.org/search.html?q=ISO%203016 |
| ASTM D5972 | ASTM | Cold-flow and low-temperature fuel properties | Test method | Characterises filterability, cloud formation, freezing or pour behaviour using the test specified for the fuel and climatic grade. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D5972 |
| ASTM D2386 | ASTM | Cold-flow and low-temperature fuel properties | Test method | Characterises filterability, cloud formation, freezing or pour behaviour using the test specified for the fuel and climatic grade. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D2386 |
| IP 16 | IP/EI | Cold-flow and low-temperature fuel properties | Test method | Characterises filterability, cloud formation, freezing or pour behaviour using the test specified for the fuel and climatic grade. | https://publishing.energyinst.org/topics/petroleum-product-testing |
| IS 1448 Part 10 Section 1 | IS/BIS | Cold-flow and low-temperature fuel properties | Test method | Characterises filterability, cloud formation, freezing or pour behaviour using the test specified for the fuel and climatic grade. | https://standardsbis.bsbedge.com/BIS_SearchStandard.aspx?Standard_Number=IS%201448%20Part%2010%20Section%201&id=0 |
| IS 1448 Part 10 Section 2 | IS/BIS | Cold-flow and low-temperature fuel properties | Test method | Characterises filterability, cloud formation, freezing or pour behaviour using the test specified for the fuel and climatic grade. | https://standardsbis.bsbedge.com/BIS_SearchStandard.aspx?Standard_Number=IS%201448%20Part%2010%20Section%202&id=0 |
| IS 1448 Part 110 | IS/BIS | Cold-flow and low-temperature fuel properties | Test method | Characterises filterability, cloud formation, freezing or pour behaviour using the test specified for the fuel and climatic grade. | https://standardsbis.bsbedge.com/BIS_SearchStandard.aspx?Standard_Number=IS%201448%20Part%20110&id=0 |
| DIN EN 116 | DIN | Cold-flow and low-temperature fuel properties | Test method | Characterises filterability, cloud formation, freezing or pour behaviour using the test specified for the fuel and climatic grade. | https://www.dinmedia.de/en/search-results/81186!search?query=DIN%20EN%20116 |
| ISO 11500 | ISO | Particle count and cleanliness coding | Test method | Counts particles by a defined optical technique and reports concentration or a cleanliness code at stated size thresholds. | https://www.iso.org/search.html?q=ISO%2011500 |
| ASTM D7647 | ASTM | Particle count and cleanliness coding | Test method | Counts particles by a defined optical technique and reports concentration or a cleanliness code at stated size thresholds. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D7647 |
| ISO 4406 | ISO | Particle count and cleanliness coding | Classification / guidance | Counts particles by a defined optical technique and reports concentration or a cleanliness code at stated size thresholds. | https://www.iso.org/search.html?q=ISO%204406 |
| ISO 11171 | ISO | Particle count and cleanliness coding | Classification / guidance | Counts particles by a defined optical technique and reports concentration or a cleanliness code at stated size thresholds. | https://www.iso.org/search.html?q=ISO%2011171 |
| ISO 21018-4 | ISO | Particle count and cleanliness coding | Test method | Counts particles by a defined optical technique and reports concentration or a cleanliness code at stated size thresholds. | https://www.iso.org/search.html?q=ISO%2021018-4 |
| ASTM D5185 | ASTM | Elemental analysis by ICP-OES | Test method | Determines dissolved and fine suspended elements for additive, contaminant and wear-metal assessment within sample-introduction and particle-size limitations. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D5185 |
| ASTM D7303 | ASTM | Elemental analysis by ICP-OES | Test method | Determines dissolved and fine suspended elements for additive, contaminant and wear-metal assessment within sample-introduction and particle-size limitations. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D7303 |
| IP 501 | IP/EI | Elemental analysis by ICP-OES | Test method | Determines dissolved and fine suspended elements for additive, contaminant and wear-metal assessment within sample-introduction and particle-size limitations. Determines catalyst-fine indicator elements in residual and distillate marine fuels using a method accepted by the governing marine-fuel specification. | https://publishing.energyinst.org/topics/petroleum-product-testing |
| IP 470 | IP/EI | Elemental analysis by ICP-OES | Test method | Determines dissolved and fine suspended elements for additive, contaminant and wear-metal assessment within sample-introduction and particle-size limitations. Determines catalyst-fine indicator elements in residual and distillate marine fuels using a method accepted by the governing marine-fuel specification. | https://publishing.energyinst.org/topics/petroleum-product-testing |
| ASTM D7690 | ASTM | Ferrous density and wear-particle morphology | Test method | Complements spectrometric analysis by responding to larger ferromagnetic debris or examining particle morphology and severity. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D7690 |
| Direct-reading ferrous density | OEM / laboratory | Ferrous density and wear-particle morphology | Screening / complementary method | Complements spectrometric analysis by responding to larger ferromagnetic debris or examining particle morphology and severity. | /editorial-policy/ |
| Analytical ferrography | OEM / laboratory | Ferrous density and wear-particle morphology | Screening / complementary method | Complements spectrometric analysis by responding to larger ferromagnetic debris or examining particle morphology and severity. | /editorial-policy/ |
| ASTM E2412 | ASTM | Infrared lubricant condition monitoring | Test method | Uses FTIR spectra to trend oxidation, nitration, soot and selected contaminants against an appropriate reference and validated practice. Determines or screens volatile fuel and coolant markers using chromatography, infrared or a validated product-specific procedure. | https://www.astm.org/search/full-site-search.html?query=ASTM%20E2412 |
| ASTM D7412 | ASTM | Infrared lubricant condition monitoring | Test method | Uses FTIR spectra to trend oxidation, nitration, soot and selected contaminants against an appropriate reference and validated practice. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D7412 |
| ASTM D7414 | ASTM | Infrared lubricant condition monitoring | Test method | Uses FTIR spectra to trend oxidation, nitration, soot and selected contaminants against an appropriate reference and validated practice. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D7414 |
| ASTM D7624 | ASTM | Infrared lubricant condition monitoring | Test method | Uses FTIR spectra to trend oxidation, nitration, soot and selected contaminants against an appropriate reference and validated practice. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D7624 |
| ASTM D7593 | ASTM | Fuel dilution and glycol contamination in used oil | Test method | Determines or screens volatile fuel and coolant markers using chromatography, infrared or a validated product-specific procedure. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D7593 |
| ASTM D4291 | ASTM | Fuel dilution and glycol contamination in used oil | Test method | Determines or screens volatile fuel and coolant markers using chromatography, infrared or a validated product-specific procedure. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D4291 |
| Gas chromatography | OEM / laboratory | Fuel dilution and glycol contamination in used oil | Screening / complementary method | Determines or screens volatile fuel and coolant markers using chromatography, infrared or a validated product-specific procedure. | /editorial-policy/ |
| ASTM D1401 | ASTM | Water separability / demulsibility | Test method | Determines the ability of an oil and water mixture to separate under defined temperature, agitation and observation conditions. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D1401 |
| ISO 6614 | ISO | Water separability / demulsibility | Test method | Determines the ability of an oil and water mixture to separate under defined temperature, agitation and observation conditions. | https://www.iso.org/search.html?q=ISO%206614 |
| DIN ISO 6614 | DIN | Water separability / demulsibility | Test method | Determines the ability of an oil and water mixture to separate under defined temperature, agitation and observation conditions. | https://www.dinmedia.de/en/search-results/81186!search?query=DIN%20ISO%206614 |
| ASTM D892 | ASTM | Foaming tendency and stability | Test method | Determines surface-foam tendency and stability under prescribed air-flow and temperature sequences. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D892 |
| ASTM D6082 | ASTM | Foaming tendency and stability | Test method | Determines surface-foam tendency and stability under prescribed air-flow and temperature sequences. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D6082 |
| ISO 6247 | ISO | Foaming tendency and stability | Test method | Determines surface-foam tendency and stability under prescribed air-flow and temperature sequences. | https://www.iso.org/search.html?q=ISO%206247 |
| ASTM D3427 | ASTM | Air-release properties | Test method | Measures the time for entrained air to reduce to a specified level at the stated test temperature. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D3427 |
| ISO 9120 | ISO | Air-release properties | Test method | Measures the time for entrained air to reduce to a specified level at the stated test temperature. | https://www.iso.org/search.html?q=ISO%209120 |
| DIN ISO 9120 | DIN | Air-release properties | Test method | Measures the time for entrained air to reduce to a specified level at the stated test temperature. | https://www.dinmedia.de/en/search-results/81186!search?query=DIN%20ISO%209120 |
| ASTM D2272 | ASTM | Oxidation stability and remaining antioxidant reserve | Test method | Assesses resistance to oxidation or remaining oxidation stability using the procedure appropriate to lubricants, middle distillates or biodiesel blends. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D2272 |
| ASTM D7462 | ASTM | Oxidation stability and remaining antioxidant reserve | Test method | Assesses resistance to oxidation or remaining oxidation stability using the procedure appropriate to lubricants, middle distillates or biodiesel blends. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D7462 |
| EN 15751 | EN | Oxidation stability and remaining antioxidant reserve | Test method | Assesses resistance to oxidation or remaining oxidation stability using the procedure appropriate to lubricants, middle distillates or biodiesel blends. | https://standards.cencenelec.eu/ |
| EN 14112 | EN | Oxidation stability and remaining antioxidant reserve | Test method | Assesses resistance to oxidation or remaining oxidation stability using the procedure appropriate to lubricants, middle distillates or biodiesel blends. | https://standards.cencenelec.eu/ |
| IS 1448 Part 154 | IS/BIS | Oxidation stability and remaining antioxidant reserve | Test method | Assesses resistance to oxidation or remaining oxidation stability using the procedure appropriate to lubricants, middle distillates or biodiesel blends. | https://standardsbis.bsbedge.com/BIS_SearchStandard.aspx?Standard_Number=IS%201448%20Part%20154&id=0 |
| ASTM D7843 | ASTM | Varnish potential / membrane patch colorimetry | Test method | Measures colour bodies captured on a membrane as an indicator of lubricant-generated insoluble and varnish potential. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D7843 |
| ASTM D130 | ASTM | Copper-strip corrosion | Test method | Rates corrosivity toward copper under defined immersion, temperature and comparison conditions; it does not measure in-service copper wear. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D130 |
| ISO 2160 | ISO | Copper-strip corrosion | Test method | Rates corrosivity toward copper under defined immersion, temperature and comparison conditions; it does not measure in-service copper wear. | https://www.iso.org/search.html?q=ISO%202160 |
| IS 1448 Part 15 | IS/BIS | Copper-strip corrosion | Test method | Rates corrosivity toward copper under defined immersion, temperature and comparison conditions; it does not measure in-service copper wear. | https://standardsbis.bsbedge.com/BIS_SearchStandard.aspx?Standard_Number=IS%201448%20Part%2015&id=0 |
| DIN EN ISO 2160 | DIN | Copper-strip corrosion | Test method | Rates corrosivity toward copper under defined immersion, temperature and comparison conditions; it does not measure in-service copper wear. | https://www.dinmedia.de/en/search-results/81186!search?query=DIN%20EN%20ISO%202160 |
| ASTM D4172 | ASTM | Four-ball wear and extreme-pressure performance | Test method | Characterises anti-wear, weld load or load-carrying performance in a laboratory four-ball apparatus for product comparison and qualification. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D4172 |
| ASTM D2783 | ASTM | Four-ball wear and extreme-pressure performance | Test method | Characterises anti-wear, weld load or load-carrying performance in a laboratory four-ball apparatus for product comparison and qualification. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D2783 |
| IS 1448 Part 170 | IS/BIS | Four-ball wear and extreme-pressure performance | Test method | Characterises anti-wear, weld load or load-carrying performance in a laboratory four-ball apparatus for product comparison and qualification. | https://standardsbis.bsbedge.com/BIS_SearchStandard.aspx?Standard_Number=IS%201448%20Part%20170&id=0 |
| DIN 51350-1 | DIN | Four-ball wear and extreme-pressure performance | Test method | Characterises anti-wear, weld load or load-carrying performance in a laboratory four-ball apparatus for product comparison and qualification. | https://www.dinmedia.de/en/search-results/81186!search?query=DIN%2051350-1 |
| DIN 51350-2 | DIN | Four-ball wear and extreme-pressure performance | Test method | Characterises anti-wear, weld load or load-carrying performance in a laboratory four-ball apparatus for product comparison and qualification. | https://www.dinmedia.de/en/search-results/81186!search?query=DIN%2051350-2 |
| DIN 51350-3 | DIN | Four-ball wear and extreme-pressure performance | Test method | Characterises anti-wear, weld load or load-carrying performance in a laboratory four-ball apparatus for product comparison and qualification. | https://www.dinmedia.de/en/search-results/81186!search?query=DIN%2051350-3 |
| DIN 51350-4 | DIN | Four-ball wear and extreme-pressure performance | Test method | Characterises anti-wear, weld load or load-carrying performance in a laboratory four-ball apparatus for product comparison and qualification. | https://www.dinmedia.de/en/search-results/81186!search?query=DIN%2051350-4 |
| DIN 51350-5 | DIN | Four-ball wear and extreme-pressure performance | Test method | Characterises anti-wear, weld load or load-carrying performance in a laboratory four-ball apparatus for product comparison and qualification. | https://www.dinmedia.de/en/search-results/81186!search?query=DIN%2051350-5 |
| DIN 51350-6 | DIN | Four-ball wear and extreme-pressure performance | Test method | Characterises anti-wear, weld load or load-carrying performance in a laboratory four-ball apparatus for product comparison and qualification. | https://www.dinmedia.de/en/search-results/81186!search?query=DIN%2051350-6 |
| ASTM D5800 | ASTM | Evaporation loss | Test method | Determines lubricant volatility or evaporation loss at defined temperature and airflow or vacuum conditions. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D5800 |
| DIN 51581 | DIN | Evaporation loss | Test method | Determines lubricant volatility or evaporation loss at defined temperature and airflow or vacuum conditions. | https://www.dinmedia.de/en/search-results/81186!search?query=DIN%2051581 |
| ASTM D217 | ASTM | Grease consistency, dropping point and separation | Test method | Characterises grease consistency, high-temperature thickener response and oil-release tendency using separate controlled procedures. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D217 |
| ISO 2137 | ISO | Grease consistency, dropping point and separation | Test method | Characterises grease consistency, high-temperature thickener response and oil-release tendency using separate controlled procedures. | https://www.iso.org/search.html?q=ISO%202137 |
| ASTM D2265 | ASTM | Grease consistency, dropping point and separation | Test method | Characterises grease consistency, high-temperature thickener response and oil-release tendency using separate controlled procedures. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D2265 |
| ISO 6299 | ISO | Grease consistency, dropping point and separation | Test method | Characterises grease consistency, high-temperature thickener response and oil-release tendency using separate controlled procedures. | https://www.iso.org/search.html?q=ISO%206299 |
| ASTM D6184 | ASTM | Grease consistency, dropping point and separation | Test method | Characterises grease consistency, high-temperature thickener response and oil-release tendency using separate controlled procedures. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D6184 |
| DIN ISO 2137 | DIN | Grease consistency, dropping point and separation | Test method | Characterises grease consistency, high-temperature thickener response and oil-release tendency using separate controlled procedures. | https://www.dinmedia.de/en/search-results/81186!search?query=DIN%20ISO%202137 |
| DIN ISO 6299 | DIN | Grease consistency, dropping point and separation | Test method | Characterises grease consistency, high-temperature thickener response and oil-release tendency using separate controlled procedures. | https://www.dinmedia.de/en/search-results/81186!search?query=DIN%20ISO%206299 |
| ASTM D6185 | ASTM | Grease compatibility | Test method | Evaluates selected physical-property changes in mixtures to screen compatibility before a grease conversion. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D6185 |
| ASTM D874 | ASTM | Sulfated ash | Test method | Determines metal-containing ash after controlled ignition and sulfation for formulation identity and ash-related application assessment. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D874 |
| ISO 3987 | ISO | Sulfated ash | Test method | Determines metal-containing ash after controlled ignition and sulfation for formulation identity and ash-related application assessment. | https://www.iso.org/search.html?q=ISO%203987 |
| DIN 51575 | DIN | Sulfated ash | Test method | Determines metal-containing ash after controlled ignition and sulfation for formulation identity and ash-related application assessment. | https://www.dinmedia.de/en/search-results/81186!search?query=DIN%2051575 |
| ASTM D2699 | ASTM | Gasoline octane quality | Test method | Determines research or motor octane number in standardised knock-test engines under the prescribed operating conditions. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D2699 |
| ASTM D2700 | ASTM | Gasoline octane quality | Test method | Determines research or motor octane number in standardised knock-test engines under the prescribed operating conditions. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D2700 |
| EN ISO 5164 | EN | Gasoline octane quality | Test method | Determines research or motor octane number in standardised knock-test engines under the prescribed operating conditions. | https://standards.cencenelec.eu/ |
| EN ISO 5163 | EN | Gasoline octane quality | Test method | Determines research or motor octane number in standardised knock-test engines under the prescribed operating conditions. | https://standards.cencenelec.eu/ |
| ASTM D5191 | ASTM | Vapour pressure | Test method | Determines fuel vapour pressure for volatility, seasonal operability and evaporative-emission control. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D5191 |
| EN 13016 | EN | Vapour pressure | Test method | Determines fuel vapour pressure for volatility, seasonal operability and evaporative-emission control. | https://standards.cencenelec.eu/ |
| ASTM D4815 | ASTM | Oxygenate, alcohol and FAME content | Test method | Determines alcohol, oxygenate or fatty-acid methyl ester content for blend identity and specification compliance. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D4815 |
| EN 1601 | EN | Oxygenate, alcohol and FAME content | Test method | Determines alcohol, oxygenate or fatty-acid methyl ester content for blend identity and specification compliance. | https://standards.cencenelec.eu/ |
| EN 14078 | EN | Oxygenate, alcohol and FAME content | Test method | Determines alcohol, oxygenate or fatty-acid methyl ester content for blend identity and specification compliance. | https://standards.cencenelec.eu/ |
| IS 17029 | IS/BIS | Oxygenate, alcohol and FAME content | Product specification | Determines alcohol, oxygenate or fatty-acid methyl ester content for blend identity and specification compliance. Indian product specifications define grade requirements and referenced test methods for fuels supplied in the Indian market. | https://standardsbis.bsbedge.com/BIS_SearchStandard.aspx?Standard_Number=IS%2017029&id=0 |
| ASTM D6584 | ASTM | Biodiesel glycerin and conversion quality | Test method | Determines free and total glycerin or glyceride species as indicators of biodiesel conversion and purification. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D6584 |
| EN 14105 | EN | Biodiesel glycerin and conversion quality | Test method | Determines free and total glycerin or glyceride species as indicators of biodiesel conversion and purification. | https://standards.cencenelec.eu/ |
| IS 15607 | IS/BIS | Biodiesel glycerin and conversion quality | Product specification | Determines free and total glycerin or glyceride species as indicators of biodiesel conversion and purification. Indian product specifications define grade requirements and referenced test methods for fuels supplied in the Indian market. | https://standardsbis.bsbedge.com/BIS_SearchStandard.aspx?Standard_Number=IS%2015607&id=0 |
| IS 16531 | IS/BIS | Biodiesel glycerin and conversion quality | Product specification | Determines free and total glycerin or glyceride species as indicators of biodiesel conversion and purification. Indian product specifications define grade requirements and referenced test methods for fuels supplied in the Indian market. | https://standardsbis.bsbedge.com/BIS_SearchStandard.aspx?Standard_Number=IS%2016531&id=0 |
| ASTM D3241 | ASTM | Aviation turbine fuel thermal stability | Test method | Assesses deposit formation and pressure-drop tendency under controlled thermal stress for aviation turbine fuel release and investigation. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D3241 |
| IP 323 | IP/EI | Aviation turbine fuel thermal stability | Test method | Assesses deposit formation and pressure-drop tendency under controlled thermal stress for aviation turbine fuel release and investigation. | https://publishing.energyinst.org/topics/petroleum-product-testing |
| ASTM D1322 | ASTM | Smoke point | Test method | Determines smoke point of kerosene-range fuels as a controlled indicator of sooting tendency. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D1322 |
| ISO 3014 | ISO | Smoke point | Test method | Determines smoke point of kerosene-range fuels as a controlled indicator of sooting tendency. | https://www.iso.org/search.html?q=ISO%203014 |
| DIN EN ISO 3014 | DIN | Smoke point | Test method | Determines smoke point of kerosene-range fuels as a controlled indicator of sooting tendency. | https://www.dinmedia.de/en/search-results/81186!search?query=DIN%20EN%20ISO%203014 |
| ASTM D4530 | ASTM | Carbon residue and total sediment | Test method | Determines residue-forming tendency or sediment in distillate and residual fuels using the method required by the product specification. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D4530 |
| ISO 10307-1 | ISO | Carbon residue and total sediment | Test method | Determines residue-forming tendency or sediment in distillate and residual fuels using the method required by the product specification. | https://www.iso.org/search.html?q=ISO%2010307-1 |
| ISO 10307-2 | ISO | Carbon residue and total sediment | Test method | Determines residue-forming tendency or sediment in distillate and residual fuels using the method required by the product specification. | https://www.iso.org/search.html?q=ISO%2010307-2 |
| IP 375 | IP/EI | Carbon residue and total sediment | Test method | Determines residue-forming tendency or sediment in distillate and residual fuels using the method required by the product specification. | https://publishing.energyinst.org/topics/petroleum-product-testing |
| IS 1448 Part 8 | IS/BIS | Carbon residue and total sediment | Test method | Determines residue-forming tendency or sediment in distillate and residual fuels using the method required by the product specification. | https://standardsbis.bsbedge.com/BIS_SearchStandard.aspx?Standard_Number=IS%201448%20Part%208&id=0 |
| IS 1448 Part 189 | IS/BIS | Carbon residue and total sediment | Test method | Determines residue-forming tendency or sediment in distillate and residual fuels using the method required by the product specification. | https://standardsbis.bsbedge.com/BIS_SearchStandard.aspx?Standard_Number=IS%201448%20Part%20189&id=0 |
| ISO 8217 | ISO | Marine fuel aluminium and silicon | Product specification | Determines catalyst-fine indicator elements in residual and distillate marine fuels using a method accepted by the governing marine-fuel specification. Provides marine-fuel product requirements and referenced test methods; compatibility screening must use the procedure required by the contract or laboratory. Product specifications define grade requirements, permitted methods and reporting rules for fuels supplied under the relevant jurisdiction or contract. | https://www.iso.org/search.html?q=ISO%208217 |
| ASTM D1121 | ASTM | Coolant reserve alkalinity and corrosion | Test method | Assesses reserve alkalinity and controlled glassware corrosion for coolant qualification, supplemented by in-service elemental trending. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D1121 |
| ASTM D1384 | ASTM | Coolant reserve alkalinity and corrosion | Test method | Assesses reserve alkalinity and controlled glassware corrosion for coolant qualification, supplemented by in-service elemental trending. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D1384 |
| ASTM D3306 | ASTM | Coolant reserve alkalinity and corrosion | Product specification | Assesses reserve alkalinity and controlled glassware corrosion for coolant qualification, supplemented by in-service elemental trending. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D3306 |
| ASTM D6210 | ASTM | Coolant reserve alkalinity and corrosion | Product specification | Assesses reserve alkalinity and controlled glassware corrosion for coolant qualification, supplemented by in-service elemental trending. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D6210 |
| ASTM E2694 | ASTM | Microbial contamination | Test method | Uses a validated culture, dip-slide, ATP or microbiological procedure appropriate to the fluid, exposure and hygiene decision. | https://www.astm.org/search/full-site-search.html?query=ASTM%20E2694 |
| Dip-slide / culture | OEM / laboratory | Microbial contamination | Screening / complementary method | Uses a validated culture, dip-slide, ATP or microbiological procedure appropriate to the fluid, exposure and hygiene decision. | /editorial-policy/ |
| ATP procedure | OEM / laboratory | Microbial contamination | Screening / complementary method | Uses a validated culture, dip-slide, ATP or microbiological procedure appropriate to the fluid, exposure and hygiene decision. | /editorial-policy/ |
| ASTM D6200 | ASTM | Quenching-oil cooling characteristics | Test method | Determines cooling-curve characteristics of quenchants under controlled probe, agitation and bath conditions. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D6200 |
| ISO 9950 | ISO | Quenching-oil cooling characteristics | Test method | Determines cooling-curve characteristics of quenchants under controlled probe, agitation and bath conditions. | https://www.iso.org/search.html?q=ISO%209950 |
| ISO 22241-1 | ISO | AUS 32 / AdBlue quality | Product specification | Defines AUS 32 quality characteristics and analytical procedures for urea concentration, impurities, handling and SCR-system compatibility. | https://www.iso.org/search.html?q=ISO%2022241-1 |
| ISO 22241-2 | ISO | AUS 32 / AdBlue quality | Test method | Defines AUS 32 quality characteristics and analytical procedures for urea concentration, impurities, handling and SCR-system compatibility. | https://www.iso.org/search.html?q=ISO%2022241-2 |
| ISO 22241-3 | ISO | AUS 32 / AdBlue quality | Classification / guidance | Defines AUS 32 quality characteristics and analytical procedures for urea concentration, impurities, handling and SCR-system compatibility. | https://www.iso.org/search.html?q=ISO%2022241-3 |
| ISO 22241-4 | ISO | AUS 32 / AdBlue quality | Classification / guidance | Defines AUS 32 quality characteristics and analytical procedures for urea concentration, impurities, handling and SCR-system compatibility. | https://www.iso.org/search.html?q=ISO%2022241-4 |
| DIN 70070 | DIN | AUS 32 / AdBlue quality | Product specification | Defines AUS 32 quality characteristics and analytical procedures for urea concentration, impurities, handling and SCR-system compatibility. | https://www.dinmedia.de/en/search-results/81186!search?query=DIN%2070070 |
| IEC 60156 | IEC | Insulating-liquid breakdown voltage | Test method | Determines dielectric breakdown voltage under the electrode system, gap and preparation specified by the selected method. | https://webstore.iec.ch/en/search?query=IEC%2060156 |
| ASTM D1816 | ASTM | Insulating-liquid breakdown voltage | Test method | Determines dielectric breakdown voltage under the electrode system, gap and preparation specified by the selected method. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D1816 |
| ASTM D877 | ASTM | Insulating-liquid breakdown voltage | Test method | Determines dielectric breakdown voltage under the electrode system, gap and preparation specified by the selected method. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D877 |
| IEC 60567 | IEC | Dissolved gas analysis | Test method | Extracts and quantifies gases dissolved in insulating liquids for transformer thermal and electrical fault assessment. | https://webstore.iec.ch/en/search?query=IEC%2060567 |
| ASTM D3612 | ASTM | Dissolved gas analysis | Test method | Extracts and quantifies gases dissolved in insulating liquids for transformer thermal and electrical fault assessment. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D3612 |
| IEC 60599 | IEC | Dissolved gas analysis | Classification / guidance | Extracts and quantifies gases dissolved in insulating liquids for transformer thermal and electrical fault assessment. Provides condition-supervision, maintenance and dissolved-gas interpretation guidance for mineral insulating liquids in electrical equipment. | https://webstore.iec.ch/en/search?query=IEC%2060599 |
| IEEE C57.104 | Industry / OEM | Dissolved gas analysis | Classification / guidance | Extracts and quantifies gases dissolved in insulating liquids for transformer thermal and electrical fault assessment. Provides condition-supervision, maintenance and dissolved-gas interpretation guidance for mineral insulating liquids in electrical equipment. | https://standards.ieee.org/ |
| ASTM D971 | ASTM | Interfacial tension and dielectric dissipation factor | Test method | Assesses polar contaminants, ageing products and dielectric losses in insulating or turbine-type fluids. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D971 |
| ISO 6295 | ISO | Interfacial tension and dielectric dissipation factor | Test method | Assesses polar contaminants, ageing products and dielectric losses in insulating or turbine-type fluids. | https://www.iso.org/search.html?q=ISO%206295 |
| IEC 60247 | IEC | Interfacial tension and dielectric dissipation factor | Test method | Assesses polar contaminants, ageing products and dielectric losses in insulating or turbine-type fluids. | https://webstore.iec.ch/en/search?query=IEC%2060247 |
| OECD 301 series | OECD | Biodegradability and environmentally acceptable lubricants | Test method | Assesses biodegradation under a defined screening test and classifies environmentally acceptable hydraulic-fluid categories. | https://www.oecd.org/en/topics/sub-issues/testing-of-chemicals/test-guidelines.html |
| ISO 15380 | ISO | Biodegradability and environmentally acceptable lubricants | Product specification | Assesses biodegradation under a defined screening test and classifies environmentally acceptable hydraulic-fluid categories. | https://www.iso.org/search.html?q=ISO%2015380 |
| ISO 8216-1 | ISO | Marine fuel quality and compatibility | Classification / guidance | Provides marine-fuel product requirements and referenced test methods; compatibility screening must use the procedure required by the contract or laboratory. | https://www.iso.org/search.html?q=ISO%208216-1 |
| ASTM D4740 | ASTM | Marine fuel quality and compatibility | Screening / complementary method | Provides marine-fuel product requirements and referenced test methods; compatibility screening must use the procedure required by the contract or laboratory. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D4740 |
| IS 1460 | IS/BIS | Indian liquid-fuel product specifications | Product specification | Indian product specifications define grade requirements and referenced test methods for fuels supplied in the Indian market. | https://standardsbis.bsbedge.com/BIS_SearchStandard.aspx?Standard_Number=IS%201460&id=0 |
| IS 2796 | IS/BIS | Indian liquid-fuel product specifications | Product specification | Indian product specifications define grade requirements and referenced test methods for fuels supplied in the Indian market. | https://standardsbis.bsbedge.com/BIS_SearchStandard.aspx?Standard_Number=IS%202796&id=0 |
| IS 1459 | IS/BIS | Indian liquid-fuel product specifications | Product specification | Indian product specifications define grade requirements and referenced test methods for fuels supplied in the Indian market. | https://standardsbis.bsbedge.com/BIS_SearchStandard.aspx?Standard_Number=IS%201459&id=0 |
| IS 1571 | IS/BIS | Indian liquid-fuel product specifications | Product specification | Indian product specifications define grade requirements and referenced test methods for fuels supplied in the Indian market. | https://standardsbis.bsbedge.com/BIS_SearchStandard.aspx?Standard_Number=IS%201571&id=0 |
| IS 1593 | IS/BIS | Indian liquid-fuel product specifications | Product specification | Indian product specifications define grade requirements and referenced test methods for fuels supplied in the Indian market. | https://standardsbis.bsbedge.com/BIS_SearchStandard.aspx?Standard_Number=IS%201593&id=0 |
| ASTM D975 | ASTM | International liquid-fuel product specifications | Product specification | Product specifications define grade requirements, permitted methods and reporting rules for fuels supplied under the relevant jurisdiction or contract. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D975 |
| EN 590 | EN | International liquid-fuel product specifications | Product specification | Product specifications define grade requirements, permitted methods and reporting rules for fuels supplied under the relevant jurisdiction or contract. | https://standards.cencenelec.eu/ |
| ASTM D4814 | ASTM | International liquid-fuel product specifications | Product specification | Product specifications define grade requirements, permitted methods and reporting rules for fuels supplied under the relevant jurisdiction or contract. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D4814 |
| EN 228 | EN | International liquid-fuel product specifications | Product specification | Product specifications define grade requirements, permitted methods and reporting rules for fuels supplied under the relevant jurisdiction or contract. | https://standards.cencenelec.eu/ |
| ASTM D6751 | ASTM | International liquid-fuel product specifications | Product specification | Product specifications define grade requirements, permitted methods and reporting rules for fuels supplied under the relevant jurisdiction or contract. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D6751 |
| EN 14214 | EN | International liquid-fuel product specifications | Product specification | Product specifications define grade requirements, permitted methods and reporting rules for fuels supplied under the relevant jurisdiction or contract. | https://standards.cencenelec.eu/ |
| ASTM D1655 | ASTM | International liquid-fuel product specifications | Product specification | Product specifications define grade requirements, permitted methods and reporting rules for fuels supplied under the relevant jurisdiction or contract. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D1655 |
| Def Stan 91-091 | Industry / OEM | International liquid-fuel product specifications | Product specification | Product specifications define grade requirements, permitted methods and reporting rules for fuels supplied under the relevant jurisdiction or contract. | https://www.dstan.mod.uk/ |
| ISO 6743-3 | ISO | Lubricant families, classifications and product specifications | Classification / guidance | Classifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit. | https://www.iso.org/search.html?q=ISO%206743-3 |
| ISO 6743-4 | ISO | Lubricant families, classifications and product specifications | Classification / guidance | Classifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit. | https://www.iso.org/search.html?q=ISO%206743-4 |
| ISO 6743-5 | ISO | Lubricant families, classifications and product specifications | Classification / guidance | Classifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit. | https://www.iso.org/search.html?q=ISO%206743-5 |
| ISO 6743-6 | ISO | Lubricant families, classifications and product specifications | Classification / guidance | Classifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit. | https://www.iso.org/search.html?q=ISO%206743-6 |
| ISO 6743-7 | ISO | Lubricant families, classifications and product specifications | Classification / guidance | Classifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit. | https://www.iso.org/search.html?q=ISO%206743-7 |
| ISO 6743-9 | ISO | Lubricant families, classifications and product specifications | Classification / guidance | Classifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit. | https://www.iso.org/search.html?q=ISO%206743-9 |
| ISO 6743-99 | ISO | Lubricant families, classifications and product specifications | Classification / guidance | Classifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit. | https://www.iso.org/search.html?q=ISO%206743-99 |
| ISO 11158 | ISO | Lubricant families, classifications and product specifications | Product specification | Classifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit. | https://www.iso.org/search.html?q=ISO%2011158 |
| DIN 51524-1 | DIN | Lubricant families, classifications and product specifications | Product specification | Classifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit. | https://www.dinmedia.de/en/search-results/81186!search?query=DIN%2051524-1 |
| DIN 51524-2 | DIN | Lubricant families, classifications and product specifications | Product specification | Classifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit. | https://www.dinmedia.de/en/search-results/81186!search?query=DIN%2051524-2 |
| DIN 51524-3 | DIN | Lubricant families, classifications and product specifications | Product specification | Classifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit. | https://www.dinmedia.de/en/search-results/81186!search?query=DIN%2051524-3 |
| DIN 51517-1 | DIN | Lubricant families, classifications and product specifications | Product specification | Classifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit. | https://www.dinmedia.de/en/search-results/81186!search?query=DIN%2051517-1 |
| DIN 51517-2 | DIN | Lubricant families, classifications and product specifications | Product specification | Classifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit. | https://www.dinmedia.de/en/search-results/81186!search?query=DIN%2051517-2 |
| DIN 51517-3 | DIN | Lubricant families, classifications and product specifications | Product specification | Classifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit. | https://www.dinmedia.de/en/search-results/81186!search?query=DIN%2051517-3 |
| DIN 51515-1 | DIN | Lubricant families, classifications and product specifications | Product specification | Classifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit. | https://www.dinmedia.de/en/search-results/81186!search?query=DIN%2051515-1 |
| DIN 51515-2 | DIN | Lubricant families, classifications and product specifications | Product specification | Classifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit. | https://www.dinmedia.de/en/search-results/81186!search?query=DIN%2051515-2 |
| DIN 51506 | DIN | Lubricant families, classifications and product specifications | Product specification | Classifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit. | https://www.dinmedia.de/en/search-results/81186!search?query=DIN%2051506 |
| DIN 51502 | DIN | Lubricant families, classifications and product specifications | Classification / guidance | Classifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit. | https://www.dinmedia.de/en/search-results/81186!search?query=DIN%2051502 |
| DIN 51825 | DIN | Lubricant families, classifications and product specifications | Product specification | Classifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit. | https://www.dinmedia.de/en/search-results/81186!search?query=DIN%2051825 |
| API 1509 | Industry / OEM | Engine-oil performance classifications and viscosity grades | Classification / guidance | Defines performance categories, engine tests, chemical limits or viscosity grades used for engine-oil licensing and OEM selection. | https://www.api.org/products-and-services/engine-oil |
| ACEA Oil Sequences | Industry / OEM | Engine-oil performance classifications and viscosity grades | Classification / guidance | Defines performance categories, engine tests, chemical limits or viscosity grades used for engine-oil licensing and OEM selection. | https://www.acea.auto/publication/oil-sequences/ |
| SAE J300 | Industry / OEM | Engine-oil performance classifications and viscosity grades | Classification / guidance | Defines performance categories, engine tests, chemical limits or viscosity grades used for engine-oil licensing and OEM selection. | https://www.sae.org/standards/ |
| JASO M355 | Industry / OEM | Engine-oil performance classifications and viscosity grades | Product specification | Defines performance categories, engine tests, chemical limits or viscosity grades used for engine-oil licensing and OEM selection. | https://www.jalos.or.jp/onfile/jaso_e.htm |
| ILSAC GF-7 | Industry / OEM | Engine-oil performance classifications and viscosity grades | Product specification | Defines performance categories, engine tests, chemical limits or viscosity grades used for engine-oil licensing and OEM selection. | https://www.ilma.org/resources/ilsac |
| IEC 60422 | IEC | Transformer insulating-oil supervision and interpretation | Classification / guidance | Provides condition-supervision, maintenance and dissolved-gas interpretation guidance for mineral insulating liquids in electrical equipment. | https://webstore.iec.ch/en/search?query=IEC%2060422 |
| ASTM D4057 | ASTM | Fuel and lubricant sampling | Classification / guidance | Defines manual sampling principles used to obtain representative petroleum-product and lubricant samples before laboratory testing. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D4057 |
| ISO 3170 | ISO | Fuel and lubricant sampling | Classification / guidance | Defines manual sampling principles used to obtain representative petroleum-product and lubricant samples before laboratory testing. | https://www.iso.org/search.html?q=ISO%203170 |
| IS 1447 Part 1 | IS/BIS | Fuel and lubricant sampling | Classification / guidance | Defines manual sampling principles used to obtain representative petroleum-product and lubricant samples before laboratory testing. | https://standardsbis.bsbedge.com/BIS_SearchStandard.aspx?Standard_Number=IS%201447%20Part%201&id=0 |
| Product-specific validated method | OEM / laboratory | Concentration, pH, conductivity and ionic profile | Screening / complementary method | Uses the product specification and a validated density, refractive-index, electrochemical, ion-chromatography or elemental method to assess aqueous and specialty-fluid composition. | /editorial-policy/ |
| Ion chromatography | OEM / laboratory | Concentration, pH, conductivity and ionic profile | Screening / complementary method | Uses the product specification and a validated density, refractive-index, electrochemical, ion-chromatography or elemental method to assess aqueous and specialty-fluid composition. | /editorial-policy/ |
| ICP-OES | OEM / laboratory | Concentration, pH, conductivity and ionic profile | Screening / complementary method | Uses the product specification and a validated density, refractive-index, electrochemical, ion-chromatography or elemental method to assess aqueous and specialty-fluid composition. | /editorial-policy/ |
| ASTM D893 | ASTM | Appearance, insolubles and gravimetric contamination | Test method | Uses documented visual, filtration or gravimetric procedures to screen foreign matter, insolubles and precipitated degradation products. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D893 |
| Documented laboratory filtration procedure | OEM / laboratory | Appearance, insolubles and gravimetric contamination | Screening / complementary method | Uses documented visual, filtration or gravimetric procedures to screen foreign matter, insolubles and precipitated degradation products. | /editorial-policy/ |
| OEM-approved friction procedure | OEM / laboratory | Friction performance for transmissions and wet brakes | Product specification | Uses the OEM-approved bench, clutch, synchroniser or wet-brake procedure named by the applicable equipment or fluid specification. | /editorial-policy/ |
| SAE J286 | Industry / OEM | Friction performance for transmissions and wet brakes | Screening / complementary method | Uses the OEM-approved bench, clutch, synchroniser or wet-brake procedure named by the applicable equipment or fluid specification. | https://www.sae.org/standards/ |
| ISO 14830-1 | ISO | Lubricant condition-monitoring programme guidance | Classification / guidance | Provides programme-level guidance for tribology-based monitoring, test selection, data quality and interpretation. | https://www.iso.org/search.html?q=ISO%2014830-1 |
| ISO 14830-2 | ISO | Lubricant condition-monitoring programme guidance | Classification / guidance | Provides programme-level guidance for tribology-based monitoring, test selection, data quality and interpretation. | https://www.iso.org/search.html?q=ISO%2014830-2 |
| ASTM D6224 | ASTM | Lubricant condition-monitoring programme guidance | Classification / guidance | Provides programme-level guidance for tribology-based monitoring, test selection, data quality and interpretation. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D6224 |
| ASTM D4378 | ASTM | Lubricant condition-monitoring programme guidance | Classification / guidance | Provides programme-level guidance for tribology-based monitoring, test selection, data quality and interpretation. | https://www.astm.org/search/full-site-search.html?query=ASTM%20D4378 |
78 protocols connected to products and tests in the Wiki.
Measures resistance to flow at a stated temperature for grade confirmation, dilution, shear and oxidation assessment.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Measures resistance to flow at a stated temperature for grade confirmation, dilution, shear and oxidation assessment.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Measures resistance to flow at a stated temperature for grade confirmation, dilution, shear and oxidation assessment.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines acidic or basic constituents by a defined titration system; results from different titration methods are not automatically interchangeable.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines acidic or basic constituents by a defined titration system; results from different titration methods are not automatically interchangeable.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines alkaline reserve in engine and cylinder lubricants using a selected titration chemistry that must remain consistent for trending.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines alkaline reserve in engine and cylinder lubricants using a selected titration chemistry that must remain consistent for trending.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines density for identity, quantity conversion, blending and compositional assessment using temperature-controlled instrumentation.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines boiling-range distribution of petroleum products for identity, volatility, combustion and contamination assessment.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines flash point using the apparatus and open- or closed-cup procedure required by the product specification.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines flash point using the apparatus and open- or closed-cup procedure required by the product specification.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Quantifies water by coulometric or volumetric Karl Fischer titration, or by the product-specific separation method named in the governing specification.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Quantifies water by coulometric or volumetric Karl Fischer titration, or by the product-specific separation method named in the governing specification.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Quantifies water by coulometric or volumetric Karl Fischer titration, or by the product-specific separation method named in the governing specification.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines sulfur by ultraviolet fluorescence or X-ray fluorescence at the concentration range and matrix covered by the selected method.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines sulfur by ultraviolet fluorescence or X-ray fluorescence at the concentration range and matrix covered by the selected method.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines ignition quality in a reference engine or approved constant-volume instrument, or calculates an index from specified fuel properties.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines ignition quality in a reference engine or approved constant-volume instrument, or calculates an index from specified fuel properties.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines ignition quality in a reference engine or approved constant-volume instrument, or calculates an index from specified fuel properties.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines diesel-fuel lubricity by high-frequency reciprocating rig under controlled temperature, humidity and conditioning.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Characterises filterability, cloud formation, freezing or pour behaviour using the test specified for the fuel and climatic grade.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Characterises filterability, cloud formation, freezing or pour behaviour using the test specified for the fuel and climatic grade.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Characterises filterability, cloud formation, freezing or pour behaviour using the test specified for the fuel and climatic grade.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Characterises filterability, cloud formation, freezing or pour behaviour using the test specified for the fuel and climatic grade.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Characterises filterability, cloud formation, freezing or pour behaviour using the test specified for the fuel and climatic grade.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Counts particles by a defined optical technique and reports concentration or a cleanliness code at stated size thresholds.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines dissolved and fine suspended elements for additive, contaminant and wear-metal assessment within sample-introduction and particle-size limitations.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines dissolved and fine suspended elements for additive, contaminant and wear-metal assessment within sample-introduction and particle-size limitations.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Complements spectrometric analysis by responding to larger ferromagnetic debris or examining particle morphology and severity.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Uses FTIR spectra to trend oxidation, nitration, soot and selected contaminants against an appropriate reference and validated practice. Determines or screens volatile fuel and coolant markers using chromatography, infrared or a validated product-specific procedure.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Uses FTIR spectra to trend oxidation, nitration, soot and selected contaminants against an appropriate reference and validated practice.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Uses FTIR spectra to trend oxidation, nitration, soot and selected contaminants against an appropriate reference and validated practice.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Uses FTIR spectra to trend oxidation, nitration, soot and selected contaminants against an appropriate reference and validated practice.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines or screens volatile fuel and coolant markers using chromatography, infrared or a validated product-specific procedure.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines or screens volatile fuel and coolant markers using chromatography, infrared or a validated product-specific procedure.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines the ability of an oil and water mixture to separate under defined temperature, agitation and observation conditions.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines surface-foam tendency and stability under prescribed air-flow and temperature sequences.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines surface-foam tendency and stability under prescribed air-flow and temperature sequences.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Measures the time for entrained air to reduce to a specified level at the stated test temperature.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Assesses resistance to oxidation or remaining oxidation stability using the procedure appropriate to lubricants, middle distillates or biodiesel blends.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Assesses resistance to oxidation or remaining oxidation stability using the procedure appropriate to lubricants, middle distillates or biodiesel blends.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Measures colour bodies captured on a membrane as an indicator of lubricant-generated insoluble and varnish potential.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Rates corrosivity toward copper under defined immersion, temperature and comparison conditions; it does not measure in-service copper wear.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Characterises anti-wear, weld load or load-carrying performance in a laboratory four-ball apparatus for product comparison and qualification.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Characterises anti-wear, weld load or load-carrying performance in a laboratory four-ball apparatus for product comparison and qualification.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines lubricant volatility or evaporation loss at defined temperature and airflow or vacuum conditions.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Characterises grease consistency, high-temperature thickener response and oil-release tendency using separate controlled procedures.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Characterises grease consistency, high-temperature thickener response and oil-release tendency using separate controlled procedures.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Characterises grease consistency, high-temperature thickener response and oil-release tendency using separate controlled procedures.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Evaluates selected physical-property changes in mixtures to screen compatibility before a grease conversion.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines metal-containing ash after controlled ignition and sulfation for formulation identity and ash-related application assessment.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines research or motor octane number in standardised knock-test engines under the prescribed operating conditions.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines research or motor octane number in standardised knock-test engines under the prescribed operating conditions.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines fuel vapour pressure for volatility, seasonal operability and evaporative-emission control.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines alcohol, oxygenate or fatty-acid methyl ester content for blend identity and specification compliance.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines free and total glycerin or glyceride species as indicators of biodiesel conversion and purification.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Assesses deposit formation and pressure-drop tendency under controlled thermal stress for aviation turbine fuel release and investigation.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines smoke point of kerosene-range fuels as a controlled indicator of sooting tendency.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines residue-forming tendency or sediment in distillate and residual fuels using the method required by the product specification.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Assesses reserve alkalinity and controlled glassware corrosion for coolant qualification, supplemented by in-service elemental trending.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Assesses reserve alkalinity and controlled glassware corrosion for coolant qualification, supplemented by in-service elemental trending.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Assesses reserve alkalinity and controlled glassware corrosion for coolant qualification, supplemented by in-service elemental trending.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Assesses reserve alkalinity and controlled glassware corrosion for coolant qualification, supplemented by in-service elemental trending.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Uses a validated culture, dip-slide, ATP or microbiological procedure appropriate to the fluid, exposure and hygiene decision.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines cooling-curve characteristics of quenchants under controlled probe, agitation and bath conditions.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines dielectric breakdown voltage under the electrode system, gap and preparation specified by the selected method.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines dielectric breakdown voltage under the electrode system, gap and preparation specified by the selected method.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Extracts and quantifies gases dissolved in insulating liquids for transformer thermal and electrical fault assessment.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Assesses polar contaminants, ageing products and dielectric losses in insulating or turbine-type fluids.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Provides marine-fuel product requirements and referenced test methods; compatibility screening must use the procedure required by the contract or laboratory.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Product specifications define grade requirements, permitted methods and reporting rules for fuels supplied under the relevant jurisdiction or contract.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Product specifications define grade requirements, permitted methods and reporting rules for fuels supplied under the relevant jurisdiction or contract.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Product specifications define grade requirements, permitted methods and reporting rules for fuels supplied under the relevant jurisdiction or contract.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Product specifications define grade requirements, permitted methods and reporting rules for fuels supplied under the relevant jurisdiction or contract.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Defines manual sampling principles used to obtain representative petroleum-product and lubricant samples before laboratory testing.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Uses documented visual, filtration or gravimetric procedures to screen foreign matter, insolubles and precipitated degradation products.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Provides programme-level guidance for tribology-based monitoring, test selection, data quality and interpretation.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Provides programme-level guidance for tribology-based monitoring, test selection, data quality and interpretation.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.45 protocols connected to products and tests in the Wiki.
Measures resistance to flow at a stated temperature for grade confirmation, dilution, shear and oxidation assessment.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines density for identity, quantity conversion, blending and compositional assessment using temperature-controlled instrumentation.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines boiling-range distribution of petroleum products for identity, volatility, combustion and contamination assessment.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines flash point using the apparatus and open- or closed-cup procedure required by the product specification.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Quantifies water by coulometric or volumetric Karl Fischer titration, or by the product-specific separation method named in the governing specification.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines sulfur by ultraviolet fluorescence or X-ray fluorescence at the concentration range and matrix covered by the selected method.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines sulfur by ultraviolet fluorescence or X-ray fluorescence at the concentration range and matrix covered by the selected method.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines sulfur by ultraviolet fluorescence or X-ray fluorescence at the concentration range and matrix covered by the selected method.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines ignition quality in a reference engine or approved constant-volume instrument, or calculates an index from specified fuel properties.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines diesel-fuel lubricity by high-frequency reciprocating rig under controlled temperature, humidity and conditioning.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Characterises filterability, cloud formation, freezing or pour behaviour using the test specified for the fuel and climatic grade.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Counts particles by a defined optical technique and reports concentration or a cleanliness code at stated size thresholds.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Counts particles by a defined optical technique and reports concentration or a cleanliness code at stated size thresholds.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Counts particles by a defined optical technique and reports concentration or a cleanliness code at stated size thresholds.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Counts particles by a defined optical technique and reports concentration or a cleanliness code at stated size thresholds.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines the ability of an oil and water mixture to separate under defined temperature, agitation and observation conditions.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines surface-foam tendency and stability under prescribed air-flow and temperature sequences.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Measures the time for entrained air to reduce to a specified level at the stated test temperature.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Rates corrosivity toward copper under defined immersion, temperature and comparison conditions; it does not measure in-service copper wear.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Characterises grease consistency, high-temperature thickener response and oil-release tendency using separate controlled procedures.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Characterises grease consistency, high-temperature thickener response and oil-release tendency using separate controlled procedures.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines metal-containing ash after controlled ignition and sulfation for formulation identity and ash-related application assessment.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines smoke point of kerosene-range fuels as a controlled indicator of sooting tendency.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines residue-forming tendency or sediment in distillate and residual fuels using the method required by the product specification.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines residue-forming tendency or sediment in distillate and residual fuels using the method required by the product specification.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines catalyst-fine indicator elements in residual and distillate marine fuels using a method accepted by the governing marine-fuel specification. Provides marine-fuel product requirements and referenced test methods; compatibility screening must use the procedure required by the contract or laboratory. Product specifications define grade requirements, permitted methods and reporting rules for fuels supplied under the relevant jurisdiction or contract.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines cooling-curve characteristics of quenchants under controlled probe, agitation and bath conditions.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Defines AUS 32 quality characteristics and analytical procedures for urea concentration, impurities, handling and SCR-system compatibility.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Defines AUS 32 quality characteristics and analytical procedures for urea concentration, impurities, handling and SCR-system compatibility.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Defines AUS 32 quality characteristics and analytical procedures for urea concentration, impurities, handling and SCR-system compatibility.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Defines AUS 32 quality characteristics and analytical procedures for urea concentration, impurities, handling and SCR-system compatibility.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Assesses polar contaminants, ageing products and dielectric losses in insulating or turbine-type fluids.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Assesses biodegradation under a defined screening test and classifies environmentally acceptable hydraulic-fluid categories.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Provides marine-fuel product requirements and referenced test methods; compatibility screening must use the procedure required by the contract or laboratory.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Classifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Classifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Classifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Classifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Classifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Classifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Classifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Classifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Defines manual sampling principles used to obtain representative petroleum-product and lubricant samples before laboratory testing.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Provides programme-level guidance for tribology-based monitoring, test selection, data quality and interpretation.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Provides programme-level guidance for tribology-based monitoring, test selection, data quality and interpretation.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.33 protocols connected to products and tests in the Wiki.
Measures resistance to flow at a stated temperature for grade confirmation, dilution, shear and oxidation assessment.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Measures resistance to flow at a stated temperature for grade confirmation, dilution, shear and oxidation assessment.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines acidic or basic constituents by a defined titration system; results from different titration methods are not automatically interchangeable.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines density for identity, quantity conversion, blending and compositional assessment using temperature-controlled instrumentation.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines density for identity, quantity conversion, blending and compositional assessment using temperature-controlled instrumentation.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines density for identity, quantity conversion, blending and compositional assessment using temperature-controlled instrumentation.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines boiling-range distribution of petroleum products for identity, volatility, combustion and contamination assessment.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines flash point using the apparatus and open- or closed-cup procedure required by the product specification.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines flash point using the apparatus and open- or closed-cup procedure required by the product specification.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Quantifies water by coulometric or volumetric Karl Fischer titration, or by the product-specific separation method named in the governing specification.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines sulfur by ultraviolet fluorescence or X-ray fluorescence at the concentration range and matrix covered by the selected method.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines sulfur by ultraviolet fluorescence or X-ray fluorescence at the concentration range and matrix covered by the selected method.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines sulfur by ultraviolet fluorescence or X-ray fluorescence at the concentration range and matrix covered by the selected method.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines ignition quality in a reference engine or approved constant-volume instrument, or calculates an index from specified fuel properties.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines ignition quality in a reference engine or approved constant-volume instrument, or calculates an index from specified fuel properties.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines diesel-fuel lubricity by high-frequency reciprocating rig under controlled temperature, humidity and conditioning.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Characterises filterability, cloud formation, freezing or pour behaviour using the test specified for the fuel and climatic grade.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Characterises filterability, cloud formation, freezing or pour behaviour using the test specified for the fuel and climatic grade.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Characterises filterability, cloud formation, freezing or pour behaviour using the test specified for the fuel and climatic grade.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Assesses resistance to oxidation or remaining oxidation stability using the procedure appropriate to lubricants, middle distillates or biodiesel blends.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Rates corrosivity toward copper under defined immersion, temperature and comparison conditions; it does not measure in-service copper wear.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Characterises anti-wear, weld load or load-carrying performance in a laboratory four-ball apparatus for product comparison and qualification.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines alcohol, oxygenate or fatty-acid methyl ester content for blend identity and specification compliance. Indian product specifications define grade requirements and referenced test methods for fuels supplied in the Indian market.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines free and total glycerin or glyceride species as indicators of biodiesel conversion and purification. Indian product specifications define grade requirements and referenced test methods for fuels supplied in the Indian market.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines free and total glycerin or glyceride species as indicators of biodiesel conversion and purification. Indian product specifications define grade requirements and referenced test methods for fuels supplied in the Indian market.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines residue-forming tendency or sediment in distillate and residual fuels using the method required by the product specification.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines residue-forming tendency or sediment in distillate and residual fuels using the method required by the product specification.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Indian product specifications define grade requirements and referenced test methods for fuels supplied in the Indian market.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Indian product specifications define grade requirements and referenced test methods for fuels supplied in the Indian market.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Indian product specifications define grade requirements and referenced test methods for fuels supplied in the Indian market.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Indian product specifications define grade requirements and referenced test methods for fuels supplied in the Indian market.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Indian product specifications define grade requirements and referenced test methods for fuels supplied in the Indian market.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Defines manual sampling principles used to obtain representative petroleum-product and lubricant samples before laboratory testing.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.38 protocols connected to products and tests in the Wiki.
Measures resistance to flow at a stated temperature for grade confirmation, dilution, shear and oxidation assessment.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines acidic or basic constituents by a defined titration system; results from different titration methods are not automatically interchangeable.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines alkaline reserve in engine and cylinder lubricants using a selected titration chemistry that must remain consistent for trending.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines density for identity, quantity conversion, blending and compositional assessment using temperature-controlled instrumentation.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines density for identity, quantity conversion, blending and compositional assessment using temperature-controlled instrumentation.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines boiling-range distribution of petroleum products for identity, volatility, combustion and contamination assessment.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines flash point using the apparatus and open- or closed-cup procedure required by the product specification.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Quantifies water by coulometric or volumetric Karl Fischer titration, or by the product-specific separation method named in the governing specification.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines sulfur by ultraviolet fluorescence or X-ray fluorescence at the concentration range and matrix covered by the selected method.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines ignition quality in a reference engine or approved constant-volume instrument, or calculates an index from specified fuel properties.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines diesel-fuel lubricity by high-frequency reciprocating rig under controlled temperature, humidity and conditioning.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Characterises filterability, cloud formation, freezing or pour behaviour using the test specified for the fuel and climatic grade.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines the ability of an oil and water mixture to separate under defined temperature, agitation and observation conditions.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Measures the time for entrained air to reduce to a specified level at the stated test temperature.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Rates corrosivity toward copper under defined immersion, temperature and comparison conditions; it does not measure in-service copper wear.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Characterises anti-wear, weld load or load-carrying performance in a laboratory four-ball apparatus for product comparison and qualification.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Characterises anti-wear, weld load or load-carrying performance in a laboratory four-ball apparatus for product comparison and qualification.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Characterises anti-wear, weld load or load-carrying performance in a laboratory four-ball apparatus for product comparison and qualification.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Characterises anti-wear, weld load or load-carrying performance in a laboratory four-ball apparatus for product comparison and qualification.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Characterises anti-wear, weld load or load-carrying performance in a laboratory four-ball apparatus for product comparison and qualification.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Characterises anti-wear, weld load or load-carrying performance in a laboratory four-ball apparatus for product comparison and qualification.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines lubricant volatility or evaporation loss at defined temperature and airflow or vacuum conditions.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Characterises grease consistency, high-temperature thickener response and oil-release tendency using separate controlled procedures.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Characterises grease consistency, high-temperature thickener response and oil-release tendency using separate controlled procedures.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines metal-containing ash after controlled ignition and sulfation for formulation identity and ash-related application assessment.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines smoke point of kerosene-range fuels as a controlled indicator of sooting tendency.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Defines AUS 32 quality characteristics and analytical procedures for urea concentration, impurities, handling and SCR-system compatibility.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Classifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Classifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Classifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Classifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Classifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Classifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Classifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Classifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Classifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Classifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Classifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.7 protocols connected to products and tests in the Wiki.
Determines acidic or basic constituents by a defined titration system; results from different titration methods are not automatically interchangeable.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Quantifies water by coulometric or volumetric Karl Fischer titration, or by the product-specific separation method named in the governing specification.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines dielectric breakdown voltage under the electrode system, gap and preparation specified by the selected method.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Extracts and quantifies gases dissolved in insulating liquids for transformer thermal and electrical fault assessment.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Extracts and quantifies gases dissolved in insulating liquids for transformer thermal and electrical fault assessment. Provides condition-supervision, maintenance and dissolved-gas interpretation guidance for mineral insulating liquids in electrical equipment.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Assesses polar contaminants, ageing products and dielectric losses in insulating or turbine-type fluids.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Provides condition-supervision, maintenance and dissolved-gas interpretation guidance for mineral insulating liquids in electrical equipment.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.13 protocols connected to products and tests in the Wiki.
Determines ignition quality in a reference engine or approved constant-volume instrument, or calculates an index from specified fuel properties.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Characterises filterability, cloud formation, freezing or pour behaviour using the test specified for the fuel and climatic grade.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Assesses resistance to oxidation or remaining oxidation stability using the procedure appropriate to lubricants, middle distillates or biodiesel blends.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Assesses resistance to oxidation or remaining oxidation stability using the procedure appropriate to lubricants, middle distillates or biodiesel blends.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines research or motor octane number in standardised knock-test engines under the prescribed operating conditions.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines research or motor octane number in standardised knock-test engines under the prescribed operating conditions.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines fuel vapour pressure for volatility, seasonal operability and evaporative-emission control.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines alcohol, oxygenate or fatty-acid methyl ester content for blend identity and specification compliance.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines alcohol, oxygenate or fatty-acid methyl ester content for blend identity and specification compliance.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines free and total glycerin or glyceride species as indicators of biodiesel conversion and purification.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Product specifications define grade requirements, permitted methods and reporting rules for fuels supplied under the relevant jurisdiction or contract.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Product specifications define grade requirements, permitted methods and reporting rules for fuels supplied under the relevant jurisdiction or contract.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Product specifications define grade requirements, permitted methods and reporting rules for fuels supplied under the relevant jurisdiction or contract.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.5 protocols connected to products and tests in the Wiki.
Characterises filterability, cloud formation, freezing or pour behaviour using the test specified for the fuel and climatic grade.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines dissolved and fine suspended elements for additive, contaminant and wear-metal assessment within sample-introduction and particle-size limitations. Determines catalyst-fine indicator elements in residual and distillate marine fuels using a method accepted by the governing marine-fuel specification.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines dissolved and fine suspended elements for additive, contaminant and wear-metal assessment within sample-introduction and particle-size limitations. Determines catalyst-fine indicator elements in residual and distillate marine fuels using a method accepted by the governing marine-fuel specification.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Assesses deposit formation and pressure-drop tendency under controlled thermal stress for aviation turbine fuel release and investigation.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines residue-forming tendency or sediment in distillate and residual fuels using the method required by the product specification.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.1 protocols connected to products and tests in the Wiki.
Assesses biodegradation under a defined screening test and classifies environmentally acceptable hydraulic-fluid categories.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.8 protocols connected to products and tests in the Wiki.
Extracts and quantifies gases dissolved in insulating liquids for transformer thermal and electrical fault assessment. Provides condition-supervision, maintenance and dissolved-gas interpretation guidance for mineral insulating liquids in electrical equipment.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Product specifications define grade requirements, permitted methods and reporting rules for fuels supplied under the relevant jurisdiction or contract.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Defines performance categories, engine tests, chemical limits or viscosity grades used for engine-oil licensing and OEM selection.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Defines performance categories, engine tests, chemical limits or viscosity grades used for engine-oil licensing and OEM selection.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Defines performance categories, engine tests, chemical limits or viscosity grades used for engine-oil licensing and OEM selection.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Defines performance categories, engine tests, chemical limits or viscosity grades used for engine-oil licensing and OEM selection.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Defines performance categories, engine tests, chemical limits or viscosity grades used for engine-oil licensing and OEM selection.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Uses the OEM-approved bench, clutch, synchroniser or wet-brake procedure named by the applicable equipment or fluid specification.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.10 protocols connected to products and tests in the Wiki.
Complements spectrometric analysis by responding to larger ferromagnetic debris or examining particle morphology and severity.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Complements spectrometric analysis by responding to larger ferromagnetic debris or examining particle morphology and severity.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Determines or screens volatile fuel and coolant markers using chromatography, infrared or a validated product-specific procedure.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Uses a validated culture, dip-slide, ATP or microbiological procedure appropriate to the fluid, exposure and hygiene decision.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Uses a validated culture, dip-slide, ATP or microbiological procedure appropriate to the fluid, exposure and hygiene decision.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Uses the product specification and a validated density, refractive-index, electrochemical, ion-chromatography or elemental method to assess aqueous and specialty-fluid composition.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Uses the product specification and a validated density, refractive-index, electrochemical, ion-chromatography or elemental method to assess aqueous and specialty-fluid composition.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Uses the product specification and a validated density, refractive-index, electrochemical, ion-chromatography or elemental method to assess aqueous and specialty-fluid composition.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Uses documented visual, filtration or gravimetric procedures to screen foreign matter, insolubles and precipitated degradation products.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Uses the OEM-approved bench, clutch, synchroniser or wet-brake procedure named by the applicable equipment or fluid specification.
Verify with issuing body ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.