Every referenced test and method.
| Test / parameter | Methods cited on product page | Relevant protocols in registry | Why the test matters |
|---|---|---|---|
| Sulfur | ISO 8754 / ISO 14596 | ASTM D5453 · ASTM D4294 · ISO 20846 · ISO 8754 · ISO 14596 · IS 1448 Part 159 · IS 1448 Part 160 · IS 1448 Part 161 · DIN EN ISO 20846 | Confirms the sulfur basis used for regulatory and contractual decisions. |
| Viscosity | ISO 3104 | ISO 3104 | Guides transfer, storage heating and injection-temperature management. |
| Density | ISO 12185 | ASTM D4052 · ISO 12185 · IS 1448 Part 16 · IS 1448 Part 32 · IS 1448 Part 167 · DIN EN ISO 12185 · DIN 51757 | Supports quantity conversion, identity and separator configuration. |
| Potential total sediment | ISO 10307-2 | ASTM D4530 · ISO 10307-1 · ISO 10307-2 · IP 375 · IS 1448 Part 8 · IS 1448 Part 189 | Screens reserve stability under accelerated conditions. |
| Compatibility spot / reserve-stability evaluation | Recognised laboratory or onboard screening method | ISO 8217 · ISO 8216-1 · ASTM D4740 | Supports a commingling decision between two fuels. |
| Water | ISO 3733 | ASTM D6304 · ASTM D1533 · IEC 60814 · ISO 3733 · ASTM D2709 · IS 1448 Part 182 · DIN 51777 | Identifies delivered water and supports treatment planning. |
| Aluminium + silicon | IP 501 / IP 470 | IP 501 · IP 470 · ISO 8217 | Assesses catalyst-fine exposure and purification demand. |
| Used lubricating oil markers | ISO 8217-associated screening | ISO 8217 · ISO 8216-1 · ASTM D4740 | Screens prohibited or undesirable waste-oil contamination patterns. |
Method scope, role and issuing body.
Use the official link to verify status and edition. The summaries below explain diagnostic relevance without reproducing controlled method text.
ISO 3104
Kinematic viscosity and viscosity classificationMeasures resistance to flow at a stated temperature for grade confirmation, dilution, shear and oxidation assessment.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D4052
Density and relative densityDetermines density for identity, quantity conversion, blending and compositional assessment using temperature-controlled instrumentation.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ISO 12185
Density and relative densityDetermines density for identity, quantity conversion, blending and compositional assessment using temperature-controlled instrumentation.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IS 1448 Part 16
Density and relative densityDetermines density for identity, quantity conversion, blending and compositional assessment using temperature-controlled instrumentation.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IS 1448 Part 32
Density and relative densityDetermines density for identity, quantity conversion, blending and compositional assessment using temperature-controlled instrumentation.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IS 1448 Part 167
Density and relative densityDetermines density for identity, quantity conversion, blending and compositional assessment using temperature-controlled instrumentation.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.DIN EN ISO 12185
Density and relative densityDetermines density for identity, quantity conversion, blending and compositional assessment using temperature-controlled instrumentation.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.DIN 51757
Density and relative densityDetermines density for identity, quantity conversion, blending and compositional assessment using temperature-controlled instrumentation.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D6304
Water by Karl Fischer and product-specific methodsQuantifies water by coulometric or volumetric Karl Fischer titration, or by the product-specific separation method named in the governing specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D1533
Water by Karl Fischer and product-specific methodsQuantifies water by coulometric or volumetric Karl Fischer titration, or by the product-specific separation method named in the governing specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IEC 60814
Water by Karl Fischer and product-specific methodsQuantifies water by coulometric or volumetric Karl Fischer titration, or by the product-specific separation method named in the governing specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ISO 3733
Water by Karl Fischer and product-specific methodsQuantifies water by coulometric or volumetric Karl Fischer titration, or by the product-specific separation method named in the governing specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D2709
Water by Karl Fischer and product-specific methodsQuantifies water by coulometric or volumetric Karl Fischer titration, or by the product-specific separation method named in the governing specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IS 1448 Part 182
Water by Karl Fischer and product-specific methodsQuantifies water by coulometric or volumetric Karl Fischer titration, or by the product-specific separation method named in the governing specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.DIN 51777
Water by Karl Fischer and product-specific methodsQuantifies water by coulometric or volumetric Karl Fischer titration, or by the product-specific separation method named in the governing specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D5453
Sulfur contentDetermines sulfur by ultraviolet fluorescence or X-ray fluorescence at the concentration range and matrix covered by the selected method.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D4294
Sulfur contentDetermines sulfur by ultraviolet fluorescence or X-ray fluorescence at the concentration range and matrix covered by the selected method.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ISO 20846
Sulfur contentDetermines sulfur by ultraviolet fluorescence or X-ray fluorescence at the concentration range and matrix covered by the selected method.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ISO 8754
Sulfur contentDetermines sulfur by ultraviolet fluorescence or X-ray fluorescence at the concentration range and matrix covered by the selected method.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ISO 14596
Sulfur contentDetermines sulfur by ultraviolet fluorescence or X-ray fluorescence at the concentration range and matrix covered by the selected method.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IS 1448 Part 159
Sulfur contentDetermines sulfur by ultraviolet fluorescence or X-ray fluorescence at the concentration range and matrix covered by the selected method.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IS 1448 Part 160
Sulfur contentDetermines sulfur by ultraviolet fluorescence or X-ray fluorescence at the concentration range and matrix covered by the selected method.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IS 1448 Part 161
Sulfur contentDetermines sulfur by ultraviolet fluorescence or X-ray fluorescence at the concentration range and matrix covered by the selected method.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.DIN EN ISO 20846
Sulfur contentDetermines sulfur by ultraviolet fluorescence or X-ray fluorescence at the concentration range and matrix covered by the selected method.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IP 501
Elemental analysis by ICP-OESDetermines dissolved and fine suspended elements for additive, contaminant and wear-metal assessment within sample-introduction and particle-size limitations. Determines catalyst-fine indicator elements in residual and distillate marine fuels using a method accepted by the governing marine-fuel specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IP 470
Elemental analysis by ICP-OESDetermines dissolved and fine suspended elements for additive, contaminant and wear-metal assessment within sample-introduction and particle-size limitations. Determines catalyst-fine indicator elements in residual and distillate marine fuels using a method accepted by the governing marine-fuel specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D4530
Carbon residue and total sedimentDetermines residue-forming tendency or sediment in distillate and residual fuels using the method required by the product specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ISO 10307-1
Carbon residue and total sedimentDetermines residue-forming tendency or sediment in distillate and residual fuels using the method required by the product specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ISO 10307-2
Carbon residue and total sedimentDetermines residue-forming tendency or sediment in distillate and residual fuels using the method required by the product specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IP 375
Carbon residue and total sedimentDetermines residue-forming tendency or sediment in distillate and residual fuels using the method required by the product specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IS 1448 Part 8
Carbon residue and total sedimentDetermines residue-forming tendency or sediment in distillate and residual fuels using the method required by the product specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IS 1448 Part 189
Carbon residue and total sedimentDetermines residue-forming tendency or sediment in distillate and residual fuels using the method required by the product specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ISO 8217
Marine fuel aluminium and siliconDetermines catalyst-fine indicator elements in residual and distillate marine fuels using a method accepted by the governing marine-fuel specification. Provides marine-fuel product requirements and referenced test methods; compatibility screening must use the procedure required by the contract or laboratory. Product specifications define grade requirements, permitted methods and reporting rules for fuels supplied under the relevant jurisdiction or contract.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ISO 8216-1
Marine fuel quality and compatibilityProvides marine-fuel product requirements and referenced test methods; compatibility screening must use the procedure required by the contract or laboratory.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D4740
Marine fuel quality and compatibilityProvides marine-fuel product requirements and referenced test methods; compatibility screening must use the procedure required by the contract or laboratory.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IS 1460
Indian liquid-fuel product specificationsIndian product specifications define grade requirements and referenced test methods for fuels supplied in the Indian market.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IS 2796
Indian liquid-fuel product specificationsIndian product specifications define grade requirements and referenced test methods for fuels supplied in the Indian market.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IS 1459
Indian liquid-fuel product specificationsIndian product specifications define grade requirements and referenced test methods for fuels supplied in the Indian market.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IS 1571
Indian liquid-fuel product specificationsIndian product specifications define grade requirements and referenced test methods for fuels supplied in the Indian market.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IS 1593
Indian liquid-fuel product specificationsIndian product specifications define grade requirements and referenced test methods for fuels supplied in the Indian market.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D975
International liquid-fuel product specificationsProduct specifications define grade requirements, permitted methods and reporting rules for fuels supplied under the relevant jurisdiction or contract.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.EN 590
International liquid-fuel product specificationsProduct specifications define grade requirements, permitted methods and reporting rules for fuels supplied under the relevant jurisdiction or contract.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D4814
International liquid-fuel product specificationsProduct specifications define grade requirements, permitted methods and reporting rules for fuels supplied under the relevant jurisdiction or contract.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.EN 228
International liquid-fuel product specificationsProduct specifications define grade requirements, permitted methods and reporting rules for fuels supplied under the relevant jurisdiction or contract.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D6751
International liquid-fuel product specificationsProduct specifications define grade requirements, permitted methods and reporting rules for fuels supplied under the relevant jurisdiction or contract.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.EN 14214
International liquid-fuel product specificationsProduct specifications define grade requirements, permitted methods and reporting rules for fuels supplied under the relevant jurisdiction or contract.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D1655
International liquid-fuel product specificationsProduct specifications define grade requirements, permitted methods and reporting rules for fuels supplied under the relevant jurisdiction or contract.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Def Stan 91-091
International liquid-fuel product specificationsProduct specifications define grade requirements, permitted methods and reporting rules for fuels supplied under the relevant jurisdiction or contract.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.