Every referenced test and method.
| Test / parameter | Methods cited on product page | Relevant protocols in registry | Why the test matters |
|---|---|---|---|
| Kinematic viscosity | ASTM D445 / ISO 3104 | ASTM D445 · ISO 3104 · IS 1448 Part 25 Section 1 · IS 1448 Part 186 · DIN EN ISO 3104 · ASTM D2983 · ASTM D5293 | Confirms grade and detects dilution, shear, oxidation or mixing. |
| Acid number | ASTM D664 | ASTM D664 · ASTM D974 · IEC 62021 · IS 1448 Part 2 · DIN 51558 | Trends acidic constituents, oxidation and contamination against a new-oil baseline. |
| Water | ASTM D6304 | ASTM D6304 · ASTM D1533 · IEC 60814 · ISO 3733 · ASTM D2709 · IS 1448 Part 182 · DIN 51777 | Quantifies moisture relevant to corrosion, additive loss and film strength. |
| Elemental analysis | ASTM D5185 with PQ / ferrography where needed | ASTM D5185 · ASTM D7303 · IP 501 · IP 470 · ASTM D7690 · Direct-reading ferrous density · Analytical ferrography · Product-specific validated method · Ion chromatography · ICP-OES | Screens wear, contaminants and additive chemistry within method limitations. |
| FTIR condition | ASTM E2412 trending | ASTM E2412 · ASTM D7412 · ASTM D7414 · ASTM D7624 | Tracks oxidation and selected molecular contaminants against a comparable reference. |
| Base number / alkalinity reserve | ASTM D2896 or ASTM D4739, selected consistently | ASTM D2896 · ASTM D4739 · DIN ISO 3771 | Tracks alkaline reserve used to neutralise combustion acids in engine and marine cylinder oils. |
| Nitration | ASTM E2412 FTIR trend against a comparable reference | ASTM E2412 · ASTM D7412 · ASTM D7414 · ASTM D7624 | Tracks nitrogen-oxide reaction products important in gas engines and some high-temperature combustion service. |
| Soot / carbonaceous insolubles | ASTM E2412 FTIR trending; thermogravimetric or validated infrared procedure | ASTM E2412 · ASTM D7412 · ASTM D7414 · ASTM D7624 · ASTM D893 · Documented laboratory filtration procedure | Indicates combustion-derived loading that can thicken oil, disperse additives and promote abrasive or deposit-related wear. |
| Sulfated ash | ASTM D874 | ASTM D874 · ISO 3987 · DIN 51575 | Characterises metal-containing additive and ash contribution relevant to gas-engine deposits, emissions systems and cylinder lubrication. |
| Fuel dilution | Gas chromatography, flash-point screening or validated fuel-dilution method | ASTM E2412 · ASTM D7593 · ASTM D4291 · Gas chromatography · Product-specific validated method · Ion chromatography · ICP-OES | Quantifies or screens unburned fuel that can reduce viscosity and lubricant film strength. |
| Glycol / coolant contamination | ASTM D4291; ASTM E2412; chromatography or validated colorimetric procedure | ASTM E2412 · ASTM D7593 · ASTM D4291 · Gas chromatography · Product-specific validated method · Ion chromatography · ICP-OES | Detects coolant chemistry or reaction products that can form sludge and attack bearings. |
Method scope, role and issuing body.
Use the official link to verify status and edition. The summaries below explain diagnostic relevance without reproducing controlled method text.
ASTM D445
Kinematic viscosity and viscosity classificationMeasures resistance to flow at a stated temperature for grade confirmation, dilution, shear and oxidation assessment.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ISO 3104
Kinematic viscosity and viscosity classificationMeasures resistance to flow at a stated temperature for grade confirmation, dilution, shear and oxidation assessment.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IS 1448 Part 25 Section 1
Kinematic viscosity and viscosity classificationMeasures resistance to flow at a stated temperature for grade confirmation, dilution, shear and oxidation assessment.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IS 1448 Part 186
Kinematic viscosity and viscosity classificationMeasures resistance to flow at a stated temperature for grade confirmation, dilution, shear and oxidation assessment.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.DIN EN ISO 3104
Kinematic viscosity and viscosity classificationMeasures resistance to flow at a stated temperature for grade confirmation, dilution, shear and oxidation assessment.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D2983
Kinematic viscosity and viscosity classificationMeasures resistance to flow at a stated temperature for grade confirmation, dilution, shear and oxidation assessment.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D5293
Kinematic viscosity and viscosity classificationMeasures resistance to flow at a stated temperature for grade confirmation, dilution, shear and oxidation assessment.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D664
Acid number and neutralisation numberDetermines acidic or basic constituents by a defined titration system; results from different titration methods are not automatically interchangeable.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D974
Acid number and neutralisation numberDetermines acidic or basic constituents by a defined titration system; results from different titration methods are not automatically interchangeable.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IEC 62021
Acid number and neutralisation numberDetermines acidic or basic constituents by a defined titration system; results from different titration methods are not automatically interchangeable.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IS 1448 Part 2
Acid number and neutralisation numberDetermines acidic or basic constituents by a defined titration system; results from different titration methods are not automatically interchangeable.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.DIN 51558
Acid number and neutralisation numberDetermines acidic or basic constituents by a defined titration system; results from different titration methods are not automatically interchangeable.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D2896
Base number / alkalinity reserveDetermines alkaline reserve in engine and cylinder lubricants using a selected titration chemistry that must remain consistent for trending.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D4739
Base number / alkalinity reserveDetermines alkaline reserve in engine and cylinder lubricants using a selected titration chemistry that must remain consistent for trending.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.DIN ISO 3771
Base number / alkalinity reserveDetermines alkaline reserve in engine and cylinder lubricants using a selected titration chemistry that must remain consistent for trending.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D6304
Water by Karl Fischer and product-specific methodsQuantifies water by coulometric or volumetric Karl Fischer titration, or by the product-specific separation method named in the governing specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D1533
Water by Karl Fischer and product-specific methodsQuantifies water by coulometric or volumetric Karl Fischer titration, or by the product-specific separation method named in the governing specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IEC 60814
Water by Karl Fischer and product-specific methodsQuantifies water by coulometric or volumetric Karl Fischer titration, or by the product-specific separation method named in the governing specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ISO 3733
Water by Karl Fischer and product-specific methodsQuantifies water by coulometric or volumetric Karl Fischer titration, or by the product-specific separation method named in the governing specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D2709
Water by Karl Fischer and product-specific methodsQuantifies water by coulometric or volumetric Karl Fischer titration, or by the product-specific separation method named in the governing specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IS 1448 Part 182
Water by Karl Fischer and product-specific methodsQuantifies water by coulometric or volumetric Karl Fischer titration, or by the product-specific separation method named in the governing specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.DIN 51777
Water by Karl Fischer and product-specific methodsQuantifies water by coulometric or volumetric Karl Fischer titration, or by the product-specific separation method named in the governing specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D5185
Elemental analysis by ICP-OESDetermines dissolved and fine suspended elements for additive, contaminant and wear-metal assessment within sample-introduction and particle-size limitations.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D7303
Elemental analysis by ICP-OESDetermines dissolved and fine suspended elements for additive, contaminant and wear-metal assessment within sample-introduction and particle-size limitations.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IP 501
Elemental analysis by ICP-OESDetermines dissolved and fine suspended elements for additive, contaminant and wear-metal assessment within sample-introduction and particle-size limitations. Determines catalyst-fine indicator elements in residual and distillate marine fuels using a method accepted by the governing marine-fuel specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IP 470
Elemental analysis by ICP-OESDetermines dissolved and fine suspended elements for additive, contaminant and wear-metal assessment within sample-introduction and particle-size limitations. Determines catalyst-fine indicator elements in residual and distillate marine fuels using a method accepted by the governing marine-fuel specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D7690
Ferrous density and wear-particle morphologyComplements spectrometric analysis by responding to larger ferromagnetic debris or examining particle morphology and severity.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Direct-reading ferrous density
Ferrous density and wear-particle morphologyComplements spectrometric analysis by responding to larger ferromagnetic debris or examining particle morphology and severity.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Analytical ferrography
Ferrous density and wear-particle morphologyComplements spectrometric analysis by responding to larger ferromagnetic debris or examining particle morphology and severity.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM E2412
Infrared lubricant condition monitoringUses FTIR spectra to trend oxidation, nitration, soot and selected contaminants against an appropriate reference and validated practice. Determines or screens volatile fuel and coolant markers using chromatography, infrared or a validated product-specific procedure.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D7412
Infrared lubricant condition monitoringUses FTIR spectra to trend oxidation, nitration, soot and selected contaminants against an appropriate reference and validated practice.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D7414
Infrared lubricant condition monitoringUses FTIR spectra to trend oxidation, nitration, soot and selected contaminants against an appropriate reference and validated practice.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D7624
Infrared lubricant condition monitoringUses FTIR spectra to trend oxidation, nitration, soot and selected contaminants against an appropriate reference and validated practice.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D7593
Fuel dilution and glycol contamination in used oilDetermines or screens volatile fuel and coolant markers using chromatography, infrared or a validated product-specific procedure.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D4291
Fuel dilution and glycol contamination in used oilDetermines or screens volatile fuel and coolant markers using chromatography, infrared or a validated product-specific procedure.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Gas chromatography
Fuel dilution and glycol contamination in used oilDetermines or screens volatile fuel and coolant markers using chromatography, infrared or a validated product-specific procedure.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D874
Sulfated ashDetermines metal-containing ash after controlled ignition and sulfation for formulation identity and ash-related application assessment.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ISO 3987
Sulfated ashDetermines metal-containing ash after controlled ignition and sulfation for formulation identity and ash-related application assessment.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.DIN 51575
Sulfated ashDetermines metal-containing ash after controlled ignition and sulfation for formulation identity and ash-related application assessment.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ISO 6743-3
Lubricant families, classifications and product specificationsClassifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ISO 6743-4
Lubricant families, classifications and product specificationsClassifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ISO 6743-5
Lubricant families, classifications and product specificationsClassifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ISO 6743-6
Lubricant families, classifications and product specificationsClassifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ISO 6743-7
Lubricant families, classifications and product specificationsClassifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ISO 6743-9
Lubricant families, classifications and product specificationsClassifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ISO 6743-99
Lubricant families, classifications and product specificationsClassifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ISO 11158
Lubricant families, classifications and product specificationsClassifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.DIN 51524-1
Lubricant families, classifications and product specificationsClassifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.DIN 51524-2
Lubricant families, classifications and product specificationsClassifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.DIN 51524-3
Lubricant families, classifications and product specificationsClassifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.DIN 51517-1
Lubricant families, classifications and product specificationsClassifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.DIN 51517-2
Lubricant families, classifications and product specificationsClassifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.DIN 51517-3
Lubricant families, classifications and product specificationsClassifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.DIN 51515-1
Lubricant families, classifications and product specificationsClassifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.DIN 51515-2
Lubricant families, classifications and product specificationsClassifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.DIN 51506
Lubricant families, classifications and product specificationsClassifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.DIN 51502
Lubricant families, classifications and product specificationsClassifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.DIN 51825
Lubricant families, classifications and product specificationsClassifies lubricant families and establishes application-specific minimum characteristics; it does not replace an OEM approval or in-service condition limit.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.API 1509
Engine-oil performance classifications and viscosity gradesDefines performance categories, engine tests, chemical limits or viscosity grades used for engine-oil licensing and OEM selection.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ACEA Oil Sequences
Engine-oil performance classifications and viscosity gradesDefines performance categories, engine tests, chemical limits or viscosity grades used for engine-oil licensing and OEM selection.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.SAE J300
Engine-oil performance classifications and viscosity gradesDefines performance categories, engine tests, chemical limits or viscosity grades used for engine-oil licensing and OEM selection.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.JASO M355
Engine-oil performance classifications and viscosity gradesDefines performance categories, engine tests, chemical limits or viscosity grades used for engine-oil licensing and OEM selection.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ILSAC GF-7
Engine-oil performance classifications and viscosity gradesDefines performance categories, engine tests, chemical limits or viscosity grades used for engine-oil licensing and OEM selection.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Product-specific validated method
Concentration, pH, conductivity and ionic profileUses the product specification and a validated density, refractive-index, electrochemical, ion-chromatography or elemental method to assess aqueous and specialty-fluid composition.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Ion chromatography
Concentration, pH, conductivity and ionic profileUses the product specification and a validated density, refractive-index, electrochemical, ion-chromatography or elemental method to assess aqueous and specialty-fluid composition.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ICP-OES
Concentration, pH, conductivity and ionic profileUses the product specification and a validated density, refractive-index, electrochemical, ion-chromatography or elemental method to assess aqueous and specialty-fluid composition.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D893
Appearance, insolubles and gravimetric contaminationUses documented visual, filtration or gravimetric procedures to screen foreign matter, insolubles and precipitated degradation products.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Documented laboratory filtration procedure
Appearance, insolubles and gravimetric contaminationUses documented visual, filtration or gravimetric procedures to screen foreign matter, insolubles and precipitated degradation products.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.