Every referenced test and method.
| Test / parameter | Methods cited on product page | Relevant protocols in registry | Why the test matters |
|---|---|---|---|
| Viscosity | ISO 3104 / ASTM D445 | ASTM D445 · ISO 3104 | Drives heating, transfer, atomisation and engine-setting decisions. |
| Density | ISO 12185 / ASTM D4052 | ASTM D4052 · ISO 12185 · IS 1448 Part 16 · IS 1448 Part 32 · IS 1448 Part 167 · DIN EN ISO 12185 · DIN 51757 | Supports fuel identity, energy calculations and separator performance. |
| Sulfur | ISO 8754 / ISO 14596 / ASTM methods | ASTM D5453 · ASTM D4294 · ISO 20846 · ISO 8754 · ISO 14596 · IS 1448 Part 159 · IS 1448 Part 160 · IS 1448 Part 161 · DIN EN ISO 20846 | Supports statutory, contractual and emissions-control decisions. |
| Water | ISO 3733 / ASTM D6304 where applicable | ASTM D6304 · ASTM D1533 · IEC 60814 · ISO 3733 · ASTM D2709 · IS 1448 Part 182 · DIN 51777 | Affects usable energy, separation, corrosion and microbial risk. |
| Total sediment / stability | ISO 10307 series | ASTM D4530 · ISO 10307-1 · ISO 10307-2 · IP 375 · IS 1448 Part 8 · IS 1448 Part 189 | Indicates deposit potential and storage/handling stability. |
| Catalyst fines (Al + Si) | IP 501 / IP 470 and contract methods | IP 501 · IP 470 · ISO 8217 | Screens abrasive refinery-catalyst particles relevant to engine wear. |
| Ignition / combustion quality | Calculated CCAI and recognised ignition analysers | ISO 8217 · ISO 8216-1 · ASTM D4740 | Supports combustion-risk assessment for residual fuels. |
| Flash point | ISO 2719 / ASTM D93 | ASTM D92 · ASTM D93 · ISO 2719 · IS 1448 Part 20 · IS 1448 Part 21 · DIN EN ISO 2719 | Supports shipboard safety and volatile-contamination screening. |
Method scope, role and issuing body.
Use the official link to verify status and edition. The summaries below explain diagnostic relevance without reproducing controlled method text.
ASTM D445
Kinematic viscosity and viscosity classificationMeasures resistance to flow at a stated temperature for grade confirmation, dilution, shear and oxidation assessment.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ISO 3104
Kinematic viscosity and viscosity classificationMeasures resistance to flow at a stated temperature for grade confirmation, dilution, shear and oxidation assessment.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D4052
Density and relative densityDetermines density for identity, quantity conversion, blending and compositional assessment using temperature-controlled instrumentation.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ISO 12185
Density and relative densityDetermines density for identity, quantity conversion, blending and compositional assessment using temperature-controlled instrumentation.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IS 1448 Part 16
Density and relative densityDetermines density for identity, quantity conversion, blending and compositional assessment using temperature-controlled instrumentation.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IS 1448 Part 32
Density and relative densityDetermines density for identity, quantity conversion, blending and compositional assessment using temperature-controlled instrumentation.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IS 1448 Part 167
Density and relative densityDetermines density for identity, quantity conversion, blending and compositional assessment using temperature-controlled instrumentation.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.DIN EN ISO 12185
Density and relative densityDetermines density for identity, quantity conversion, blending and compositional assessment using temperature-controlled instrumentation.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.DIN 51757
Density and relative densityDetermines density for identity, quantity conversion, blending and compositional assessment using temperature-controlled instrumentation.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D92
Flash pointDetermines flash point using the apparatus and open- or closed-cup procedure required by the product specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D93
Flash pointDetermines flash point using the apparatus and open- or closed-cup procedure required by the product specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ISO 2719
Flash pointDetermines flash point using the apparatus and open- or closed-cup procedure required by the product specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IS 1448 Part 20
Flash pointDetermines flash point using the apparatus and open- or closed-cup procedure required by the product specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IS 1448 Part 21
Flash pointDetermines flash point using the apparatus and open- or closed-cup procedure required by the product specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.DIN EN ISO 2719
Flash pointDetermines flash point using the apparatus and open- or closed-cup procedure required by the product specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D6304
Water by Karl Fischer and product-specific methodsQuantifies water by coulometric or volumetric Karl Fischer titration, or by the product-specific separation method named in the governing specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D1533
Water by Karl Fischer and product-specific methodsQuantifies water by coulometric or volumetric Karl Fischer titration, or by the product-specific separation method named in the governing specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IEC 60814
Water by Karl Fischer and product-specific methodsQuantifies water by coulometric or volumetric Karl Fischer titration, or by the product-specific separation method named in the governing specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ISO 3733
Water by Karl Fischer and product-specific methodsQuantifies water by coulometric or volumetric Karl Fischer titration, or by the product-specific separation method named in the governing specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D2709
Water by Karl Fischer and product-specific methodsQuantifies water by coulometric or volumetric Karl Fischer titration, or by the product-specific separation method named in the governing specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IS 1448 Part 182
Water by Karl Fischer and product-specific methodsQuantifies water by coulometric or volumetric Karl Fischer titration, or by the product-specific separation method named in the governing specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.DIN 51777
Water by Karl Fischer and product-specific methodsQuantifies water by coulometric or volumetric Karl Fischer titration, or by the product-specific separation method named in the governing specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D5453
Sulfur contentDetermines sulfur by ultraviolet fluorescence or X-ray fluorescence at the concentration range and matrix covered by the selected method.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D4294
Sulfur contentDetermines sulfur by ultraviolet fluorescence or X-ray fluorescence at the concentration range and matrix covered by the selected method.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ISO 20846
Sulfur contentDetermines sulfur by ultraviolet fluorescence or X-ray fluorescence at the concentration range and matrix covered by the selected method.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ISO 8754
Sulfur contentDetermines sulfur by ultraviolet fluorescence or X-ray fluorescence at the concentration range and matrix covered by the selected method.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ISO 14596
Sulfur contentDetermines sulfur by ultraviolet fluorescence or X-ray fluorescence at the concentration range and matrix covered by the selected method.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IS 1448 Part 159
Sulfur contentDetermines sulfur by ultraviolet fluorescence or X-ray fluorescence at the concentration range and matrix covered by the selected method.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IS 1448 Part 160
Sulfur contentDetermines sulfur by ultraviolet fluorescence or X-ray fluorescence at the concentration range and matrix covered by the selected method.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IS 1448 Part 161
Sulfur contentDetermines sulfur by ultraviolet fluorescence or X-ray fluorescence at the concentration range and matrix covered by the selected method.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.DIN EN ISO 20846
Sulfur contentDetermines sulfur by ultraviolet fluorescence or X-ray fluorescence at the concentration range and matrix covered by the selected method.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IP 501
Elemental analysis by ICP-OESDetermines dissolved and fine suspended elements for additive, contaminant and wear-metal assessment within sample-introduction and particle-size limitations. Determines catalyst-fine indicator elements in residual and distillate marine fuels using a method accepted by the governing marine-fuel specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IP 470
Elemental analysis by ICP-OESDetermines dissolved and fine suspended elements for additive, contaminant and wear-metal assessment within sample-introduction and particle-size limitations. Determines catalyst-fine indicator elements in residual and distillate marine fuels using a method accepted by the governing marine-fuel specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D4530
Carbon residue and total sedimentDetermines residue-forming tendency or sediment in distillate and residual fuels using the method required by the product specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ISO 10307-1
Carbon residue and total sedimentDetermines residue-forming tendency or sediment in distillate and residual fuels using the method required by the product specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ISO 10307-2
Carbon residue and total sedimentDetermines residue-forming tendency or sediment in distillate and residual fuels using the method required by the product specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IP 375
Carbon residue and total sedimentDetermines residue-forming tendency or sediment in distillate and residual fuels using the method required by the product specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IS 1448 Part 8
Carbon residue and total sedimentDetermines residue-forming tendency or sediment in distillate and residual fuels using the method required by the product specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IS 1448 Part 189
Carbon residue and total sedimentDetermines residue-forming tendency or sediment in distillate and residual fuels using the method required by the product specification.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ISO 8217
Marine fuel aluminium and siliconDetermines catalyst-fine indicator elements in residual and distillate marine fuels using a method accepted by the governing marine-fuel specification. Provides marine-fuel product requirements and referenced test methods; compatibility screening must use the procedure required by the contract or laboratory. Product specifications define grade requirements, permitted methods and reporting rules for fuels supplied under the relevant jurisdiction or contract.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ISO 8216-1
Marine fuel quality and compatibilityProvides marine-fuel product requirements and referenced test methods; compatibility screening must use the procedure required by the contract or laboratory.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D4740
Marine fuel quality and compatibilityProvides marine-fuel product requirements and referenced test methods; compatibility screening must use the procedure required by the contract or laboratory.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IS 1460
Indian liquid-fuel product specificationsIndian product specifications define grade requirements and referenced test methods for fuels supplied in the Indian market.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IS 2796
Indian liquid-fuel product specificationsIndian product specifications define grade requirements and referenced test methods for fuels supplied in the Indian market.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IS 1459
Indian liquid-fuel product specificationsIndian product specifications define grade requirements and referenced test methods for fuels supplied in the Indian market.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IS 1571
Indian liquid-fuel product specificationsIndian product specifications define grade requirements and referenced test methods for fuels supplied in the Indian market.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.IS 1593
Indian liquid-fuel product specificationsIndian product specifications define grade requirements and referenced test methods for fuels supplied in the Indian market.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D975
International liquid-fuel product specificationsProduct specifications define grade requirements, permitted methods and reporting rules for fuels supplied under the relevant jurisdiction or contract.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.EN 590
International liquid-fuel product specificationsProduct specifications define grade requirements, permitted methods and reporting rules for fuels supplied under the relevant jurisdiction or contract.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D4814
International liquid-fuel product specificationsProduct specifications define grade requirements, permitted methods and reporting rules for fuels supplied under the relevant jurisdiction or contract.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.EN 228
International liquid-fuel product specificationsProduct specifications define grade requirements, permitted methods and reporting rules for fuels supplied under the relevant jurisdiction or contract.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D6751
International liquid-fuel product specificationsProduct specifications define grade requirements, permitted methods and reporting rules for fuels supplied under the relevant jurisdiction or contract.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.EN 14214
International liquid-fuel product specificationsProduct specifications define grade requirements, permitted methods and reporting rules for fuels supplied under the relevant jurisdiction or contract.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.ASTM D1655
International liquid-fuel product specificationsProduct specifications define grade requirements, permitted methods and reporting rules for fuels supplied under the relevant jurisdiction or contract.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.Def Stan 91-091
International liquid-fuel product specificationsProduct specifications define grade requirements, permitted methods and reporting rules for fuels supplied under the relevant jurisdiction or contract.
Verify current edition ↗Verify the current edition, amendments, national adoption and contract applicability with the issuing body.