25 lubricant families.
Browse lubricants by equipment duty. Every reference explains formulation, applications, testing purpose, methods, significance, directional causes and condition-monitoring use.
Engines & mobile equipment
Choose the specific lubricant rather than relying on a generic oil label.
Engine Oil
Lubricant formulation, in-service degradation, contamination and machine-wear evidence for combustion engines.
- Monograde and multigrade
- Mineral, synthetic blend and synthetic
- Heavy-duty diesel engine oil
Gas Engine Oil
Stationary gas-engine lubricant evaluated for oxidation, nitration, acid control, deposits, wear and ash-related valve risks.
- Low-ash gas engine oil
- Medium-ash gas engine oil
- Biogas engine oil
Aviation Turbine Engine Oil
Approved synthetic aviation lubricant assessed under controlled maintenance procedures for viscosity, acidity, contamination, degradation and engine debris.
- 5 cSt synthetic turbine oil
- 3 cSt low-temperature turbine oil
- High-thermal-stability aviation oil
Tractor Transmission & Hydraulic Fluid
Multi-function agricultural fluid assessed for viscosity, friction performance, contamination, water, wear and compatibility across shared sumps.
- UTTO
- STOU
- Tractor hydraulic fluid
Transmission Fluid
Transmission lubricant and functional fluid assessed for viscosity, friction behaviour, oxidation, wear and contamination.
- ATF
- CVT fluid
- DCT fluid
Axle Oil
Final-drive and differential lubricant assessed for grade, extreme-pressure performance, water, oxidation and wear debris.
- Hypoid gear oil
- Limited-slip axle oil
- Final-drive oil
Industrial rotating equipment
Choose the specific lubricant rather than relying on a generic oil label.
Hydraulic Oil
Power-transmission fluid quality, cleanliness, water control, degradation and component-wear monitoring.
- HH / HL
- HM / anti-wear
- HV / high viscosity index
Gear Oil
Industrial and automotive gear lubricants assessed for viscosity, wear protection, contamination, oxidation and debris morphology.
- Industrial R&O gear oil
- Industrial EP gear oil
- Automotive axle gear oil
Turbine Oil
Long-life circulating oil evaluated for oxidation, varnish, water, cleanliness, air release and bearing wear.
- Steam-turbine oil
- Gas-turbine oil
- Hydraulic turbine oil
Compressor Oil
Air and gas compressor lubricant assessed for oxidation, deposits, viscosity, contamination and machine wear.
- Reciprocating compressor oil
- Rotary screw compressor oil
- Gas compressor oil
Refrigeration Oil
Compressor lubricant evaluated with refrigerant compatibility, moisture, acidity, viscosity and chemical stability in view.
- Mineral refrigeration oil
- Alkylbenzene
- POE lubricant
Vacuum Pump Oil
Low-vapour-pressure lubricant assessed for viscosity, oxidation, acidity, moisture and process contamination that can impair vacuum performance.
- Mineral vacuum oil
- PAO vacuum oil
- Ester vacuum oil
Circulating Oil
Rust-and-oxidation inhibited oil for bearings and circulation systems, monitored for water, particles, oxidation and wear.
- R&O circulating oil
- Paper-machine oil
- Bearing circulation oil
Marine & heavy-duty systems
Choose the specific lubricant rather than relying on a generic oil label.
Marine Cylinder Oil
High-BN two-stroke crosshead-engine cylinder lubricant assessed for feed-rate suitability, residual alkalinity, deposits and corrosive or abrasive wear.
- High-BN cylinder oil
- Low-sulfur-service cylinder oil
- Ultra-low-sulfur-service cylinder oil
Marine System Oil
Crosshead-engine crankcase and bearing lubricant monitored for water, cleanliness, oxidation, bearing wear and contamination by cylinder drain or fuel.
- SAE 30 system oil
- Detergent system oil
- Crosshead crankcase oil
Open Gear Lubricant
Adhesive high-load lubricant assessed for consistency, base-fluid condition, contamination, wear debris and spray-system performance.
- Fluid open-gear lubricant
- Grease-type open-gear lubricant
- Solvent-diluted lubricant
Wire Rope Lubricant
Penetrating and protective lubricant evaluated for film condition, corrosion protection, contamination and wear in loaded wire ropes.
- Penetrating rope oil
- Coating rope lubricant
- Biodegradable wire-rope fluid
Pneumatic Tool Oil
Low-viscosity air-line lubricant assessed for atomisation, rust protection, deposits, water tolerance and viscosity.
- Air-line oil
- Rock-drill oil
- Food-grade pneumatic oil
Chain Oil
Adhesive total-loss lubricant assessed for viscosity, tack, wear protection, biodegradability and contamination.
- Industrial chain oil
- Chainsaw bar oil
- High-temperature chain oil
Manufacturing & controlled environments
Choose the specific lubricant rather than relying on a generic oil label.
Cutting Oil
Neat machining lubricant assessed for viscosity, active sulfur, fatty content, oxidation, contamination and tool-performance risks.
- Straight mineral cutting oil
- Sulfurised cutting oil
- Chlorine-free EP cutting oil
Spindle Oil
Low-viscosity precision-machine lubricant evaluated for cleanliness, oxidation, rust protection and viscosity control.
- Low-viscosity spindle oil
- R&O spindle oil
- Mist-compatible spindle oil
Slideway Oil
Machine-tool way lubricant assessed for stick-slip control, tackiness, compatibility, contamination and separation from coolant.
- Horizontal-way oil
- Vertical-way tacky oil
- Way-and-gear oil
Food-Grade Lubricant
Incidental-contact lubricant assessed for product identity, viscosity, contamination, degradation and hygienic-control compatibility.
- H1 hydraulic oil
- H1 gear oil
- Food-grade compressor oil
White Mineral Oil
Highly refined mineral oil assessed for identity, viscosity, purity, colour, UV absorbance and application-specific contamination.
- Technical white oil
- Food-grade white oil
- Pharmaceutical white oil
Lubricating Grease
Semi-solid lubricant assessed for consistency, thickener identity, oil separation, water resistance, wear and contamination.
- Lithium / lithium-complex
- Calcium sulfonate complex
- Polyurea