Reliability guide for steam turbine fluids, sampling locations, common failure modes and evidence-led test selection.
Equipment overview
Steam Turbine condition monitoring must connect the fluid system to component metallurgy, operating regime, filtration, environmental exposure and maintenance history. The same concentration can represent different risk when oil age, sump volume or make-up rate changes.
Lubrication points and fluids
- Primary lubricated components
- Reservoir or sump
- Filters and debris sources
- Turbine oil
Common failure modes
Use the following as hypotheses to test, not conclusions from one result.
Correlate fluid evidence with inspection, vibration, temperature, filter condition and operating history.
Correlate fluid evidence with inspection, vibration, temperature, filter condition and operating history.
Correlate fluid evidence with inspection, vibration, temperature, filter condition and operating history.
Correlate fluid evidence with inspection, vibration, temperature, filter condition and operating history.
Routine and advanced test panels
| Test | Routine | Advanced | Triggered investigation |
|---|---|---|---|
| karl fischer water | Yes | Correlate | Use when trends or symptoms justify it |
| particle count | Yes | Correlate | Use when trends or symptoms justify it |
| acid number | Yes | Correlate | Use when trends or symptoms justify it |
| ftir oil condition monitoring | Yes | Correlate | Use when trends or symptoms justify it |
| pq index | Yes | Correlate | Use when trends or symptoms justify it |
| analytical ferrography | As needed | Yes | Use when trends or symptoms justify it |
Set frequency from asset criticality, failure-development time, operating severity and historical stability. Increase frequency after abnormal trends, maintenance or contamination events.
Sampling locations and mistakes
| Location | Suitability | Advantage | Risk |
|---|---|---|---|
| Active return line | Preferred when safely engineered | Repeatable live-system evidence | Requires flushing and a documented procedure |
| Reservoir sampling valve after flushing | Preferred when safely engineered | Repeatable live-system evidence | Requires flushing and a documented procedure |
Common mistakes
- Sampling a cold, stagnant drain
- Changing locations between rounds
- Failing to flush dead volume
- Omitting top-up and maintenance history
Common abnormal patterns
- Water ingress: requires correlation with the relevant fluid properties, companion signals and inspection evidence.
- Varnish: requires correlation with the relevant fluid properties, companion signals and inspection evidence.
- Rust: requires correlation with the relevant fluid properties, companion signals and inspection evidence.
- Bearing distress: requires correlation with the relevant fluid properties, companion signals and inspection evidence.
References and method context
References identify authoritative source families; they do not reproduce protected procedures or acceptance tables. Verify the current official edition before procedural or conformity use.